Vortex Optics Riflescope Bubble Level 30-mm


Designed to maximize accuracy, our bubble level makes it easy to maintain a perfect horizontal hold during extreme-range shooting. Available for 35mm, 34mm, 30mm, and 1-inch riflescope tubes. Use on 30-mm riflescope tube for the most precise long-range shooting. Use the bubble level to ensure that the rifle is perfectly vertical.

This will eliminate potential error caused by shooting a canted rifle. Mounts quickly and easily to the riflescope tube.

Eyepiece E-10 41.5-46mm - Vortex Optics Defender Flip Cap

Dope disk NOT included. The e-10 fits all vortex riflescopes except the 1-inch tube viper model VPR-M-01BDC, VPR-M-04BDC and VPR-M-03BDC. Outside diameter: 41. 5-46 mm | 1. 6-1. 8 inches. This is the last flip cap you will ever need. The e-10 fits all vortex riflescopes except the 1-inch tube Viper model VPR-M-01BDC, VPR-M-04BDC and VPR-M-03BDC.

The first vertical, to put your dope disk optional accessory literally right in your face. The e-10 cap is has three stop positions. The vertical position is for inserting your dope disk in to have easy access to while shooting. Virtually indestructible, this cap will fit snugly on nearly all Vortex Optics and features a snap flat spring that will keep your line of sight unobstructed.

The second at a 45 and the third at 90 to lay flat back. Made in the USA. Outside diameter: 40-46 mm | 1. 57-1. 81 inches virtually indestructible, the Defender is the most versatile and durable flip cap on the market, this is the last flip cap you'll ever need. A stainless steel spring flips the cap into multiple stop positions: vertical, 45 degrees and 90 degrees.




Similar products

Vortex Optics Precision Matched Rings 30mm - Height 1.26 inches
Vortex Optics Switchview Throw Lever SV-5 (1.81 in/46 mm) for Viper PST Gen II and Razor HD AMG Riflescopes
Vortex Optics Viper PST Gen II 5-25x50 FFP Riflescope EBR-2C MRAD
Vortex Optics Riflescope Bubble Level 30-mm
Vortex Optics Hunter 1-inch Riflescope Rings - Medium Height (0.87 in)
Vortex Optics Crossfire II 3-9x40 SFP Riflescope Dead-Hold BDC MOA
Vortex Optics Tactical 30mm Riflescope Ring — Medium Height [0.97 Inches | 24.6 mm] - 2 Pack
Vortex Optics Diamondback Tactical 6-24x50 First Focal Plane Riflescopes - EBR-2C (MOA) Tactical Reticle
Vortex Optics Diamondback 4-12x40 SFP Riflescope - Dead-Hold BDC (MOA)
Vortex Optics Viper Riflescope 50 mm Sunshade


Vortex Optics Precision Matched Rings 30mm - Height 1.45 inches

Set of 2 precision matched Riflescope Rings, for 30MM Riflescope Tubes. The vertical position is for inserting your dope disk in to have easy access to while shooting. Made in the USA. These vortex precision matched rings position the center of the riflescope tube at a height of 1. 45 inches 36. 8 mm from the base.

Vortex starts with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of. 0005 using precision Computer Numeric Controlled CNC mill. These vortex rings are then serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize. Hex wrench included.

Made in the USA. Vortex's precision matched Rings are kept in pairs throughout the manufacturing process; ensuring perfection from one set to another. Dope disk NOT included. The e-10 fits all vortex riflescopes except the 1-inch tube viper model VPR-M-01BDC, VPR-M-04BDC and VPR-M-03BDC. Outside diameter: 41.

5-46 mm | 1. 6-1. 8 inches.


Similar products

Vortex Optics Viper PST Gen II 5-25x50 FFP Riflescope EBR-2C MOA
Vortex Optics Defender Flip Cap - Objective Lens O-50 (55-59 mm)
Vortex Optics Viper HS-T 6-24x50 SFP Riflescope VMR-1 MOA
Vortex Optics Riflescope Bubble Level 30-mm
Vortex Optics Razor HD Gen II First Focal Plane Riflescopes
Vortex Optics Switchview Throw Lever SV-5 (1.81 in/46 mm) for Viper PST Gen II and Razor HD AMG Riflescopes
Vortex Optics Torque Wrench Mounting Kit
Vortex Optics Riflescope Lo Pro Bubblevel 30-mm
Wheeler Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance
Wheeler Engineering Level Level Level Scope Mounting Leveling Tool with Magnetic Base and Adaptable Design for Scope Mounting, Gunsmithing and Maintenance


Vortex Optics Switchview Throw Lever SV-5 1.81 in/46 mm for Viper PST Gen II and Razor HD AMG Riflescopes

These rifle scope accessories from Vortex are made utilizing the long lasting and trustworthy components you expect to see from this notable manufacturer. Made in the USA. Maximize the efficiency of magnification transitions with fluid precision using our throw lever. Dope disk NOT included. The e-10 fits all vortex riflescopes except the 1-inch tube viper model VPR-M-01BDC, VPR-M-04BDC and VPR-M-03BDC.

Outside diameter: 41. 5-46 mm | 1. 6-1. 8 inches. Will only work with Picatinny spec mounts-will not work with Weaver mounts. Our precision matched rings are kept in pairs throughout the manufacturing process - ensuring perfection from one set to another. We start with certified usa 7075 t6 billet aluminum and hold it to an extremely tight tolerance of.

0005 using our precision Computer Numeric Controlled CNC mill. These vortex rings are serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize. Sold two rings per package. Made in the USA. These vortex precision matched rings position the center of the riflescope tube at a height of 1.




Similar products

Vortex Optics Defender Flip Cap - Eyepiece E-10 (41.5-46mm)
Vortex Optics Riflescope Lo Pro Bubblevel 30-mm
Vortex Optics Viper PST Gen II 1-6x24 SFP Riflescope VMR-2 MOA
Vortex Optics Sport Cantilever Mounts
Vortex Optics Viper PST Gen II 5-25x50 FFP Riflescope EBR-2C MOA
Vortex Optics Riflescope Bubble Level 30-mm
Vortex Optics Strike Eagle 4-24x50 Second Focal Plane Riflescope - EBR-4 Reticle (MOA)
Vortex Optics Precision Matched Rings 30mm - Height 0.97 inches
Vortex Optics Sure Fit Riflescope Cover - X-Large
Vortex Optics Razor HD Gen II-E 1-6x24 JM-1 BDC MOA Second Focal Plane Riflescope


Vortex Optics Tactical 30mm Riflescope Ring — Medium Height 0.97 Inches | 24.6 mm - 2 Pack

Will only work with Picatinny spec mounts-will not work with Weaver mounts. Our precision matched rings are kept in pairs throughout the manufacturing process - ensuring perfection from one set to another. We start with certified usa 7075 t6 billet aluminum and hold it to an extremely tight tolerance of. 0005 using our precision Computer Numeric Controlled CNC mill.

These vortex rings are serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize. Sold two rings per package. Made in the USA. These vortex precision matched rings position the center of the riflescope tube at a height of 1. 45 inches 36. 8 mm from the base. The vertical position is for inserting your dope disk in to have easy access to while shooting.

Compatible with select riflescope magnification rings with a diameter of 1. 81 inches / 46 mm. Constructed of skeletonized, lightweight hard-anodized aluminum, the SV-5 is one tough accessory that will serve you well. Dope disk NOT included. The e-10 fits all vortex riflescopes except the 1-inch tube viper model VPR-M-01BDC, VPR-M-04BDC and VPR-M-03BDC.




Similar products

Vortex Optics Diamondback Tactical 6-24x50 First Focal Plane Riflescopes - EBR-2C (MOA) Tactical Reticle
Athlon Optics , Argos BTR, Riflescope, 6-24 x 50 First Focal Plane (FFP) 30 mm Tube, Illuminated APMR MIL Reticle
Vortex Optics Crossfire II 6-24x50 AO, 30 mm, Second Focal Plane Riflescope - Dead-Hold BDC Reticle (MOA)
Vortex Optics Defender Flip Cap - Eyepiece E-10 (41.5-46mm)
Athlon Optics , , Sun Shade, 50mm Riflescope Sun Shade (Compatible with Helos BTR, Argos BTR, Talos)
Vortex Optics Viper 6.5-20x50 PA SFP Riflescope Mil-Dot MOA
Vortex Optics Riflescope Bubble Level 30-mm
Evolution Gun Works Picatinny Rail, Black, Remington 700 SA, 20 MOA
Vortex Optics Strike Eagle 4-24x50 Second Focal Plane Riflescope - EBR-4 Reticle (MOA)
Wheeler Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance


Wheeler Engineering Professional Reticle Leveling System with Heavy-Duty Construction, Universal Design and Storage Case for Gunsmithing and Maintenance

At this point the barrel clamp level is calibrated to the guns axis. Cnc machining, factory adjusted calibration set screws, anodized aluminum construction and protective molded case put this instrument in a class of its own. The scope is rotated until the reference level is aligned with the barrel clamp level and then simply secured in place.

The wheeler pearls is the most effective instrument available for precision scope alignment. Features: - precision tool for scope reticle alignment factory calibrated reference level - maximize accuracy potential tunable barrel clamp level - CNC machined aluminum level housings protective storage case. Will only work with Picatinny spec mounts-will not work with Weaver mounts.

Our precision matched rings are kept in pairs throughout the manufacturing process - ensuring perfection from one set to another. We start with certified usa 7075 t6 billet aluminum and hold it to an extremely tight tolerance of. 0005 using our precision Computer Numeric Controlled CNC mill. These vortex rings are serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize.

Sold two rings per package. Made in the USA. These vortex precision matched rings position the center of the riflescope tube at a height of 1.


Similar products

Wheeler Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance
Tipton Best Gun Vise for Cleaning, Gunsmithing and Gun Maintenance
Wheeler Scope Mounting Kit Combo, 1-Inch/30mm - 545454
Tipton Ultra Gun Vise with Heavy-Duty Construction, Customizable Design and Non-Marring Materials for Cleaning, Gunsmithing and Maintenance
Hyskore Cleaning & Sighting Vise
Vortex Optics Riflescope Bubble Level 30-mm
Wheeler Professional Laser Bore Sighter with Magnetic Connection, Multiple Caliber Usage and Storage Case for Scope Mounting, Gunsmithing and Maintenance, Green
Vortex Optics Riflescope Lo Pro Bubblevel 30-mm
Wheeler Engineering 89-Piece Deluxe Gunsmithing Screwdriver Set with Durable Construction and Storage Case for Gunsmithing and Maintenance
Vortex Optics Precision Matched Rings 30mm - Height 1.45 inches


Wheeler Engineering Level Level Level Scope Mounting Leveling Tool with Magnetic Base and Adaptable Design for Scope Mounting, Gunsmithing and Maintenance

The level-level-level works because the scope is leveled to your receiver, not to the top of a scope base. Crooked crosshairs cause your scope adjustments to be unreliable, and even make zeroing your rifle a frustrating and costly experience. Then level the scope, tighten the rings, and the job is done. The vertical position is for inserting your dope disk in to have easy access to while shooting.

. Ease of use: place the scope turret level on the top scope cap and the Action Level above the bolt; once the levels show a level scope, simply tighten the rings down. Don't believe it! an accurate rifle requires level crosshairs, and the level-level-level gives you the means to level your scope perfectly in only minutes.

The makers of some scope leveling devices tell you that leveling your scope to the top of the base produces a level scope. Virtually indestructible, the Defender is the most versatile and durable flip cap on the market, this is the last flip cap you'll ever need. A stainless steel spring flips the cap into multiple stop positions: vertical, 45 degrees and 90 degrees.

Hex wrench included. Includes: 2 calibrated machined aluminum level housings, 1 foam-molded storage case. Level your scope as you mount it on your rifle. The simplest, most accurate scope leveling system ever devised.


Similar products

Wheeler Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance
Tipton Best Gun Vise for Cleaning, Gunsmithing and Gun Maintenance
Vortex Optics Torque Wrench Mounting Kit
Wheeler 710909 Digital Firearms Accurizing Torque Wrench
Vortex Optics Riflescope Bubble Level 30-mm
Loctite Heavy Duty Threadlocker, 0.2 oz, Blue 242, Single
Vortex Optics Defender Flip Cap - Eyepiece E-10 (41.5-46mm)
Tipton Ultra Gun Vise with Heavy-Duty Construction, Customizable Design and Non-Marring Materials for Cleaning, Gunsmithing and Maintenance
Vortex Optics Precision Matched Rings 30mm - Height 1.45 inches
Wheeler Engineering Professional Reticle Leveling System with Heavy-Duty Construction, Universal Design and Storage Case for Gunsmithing and Maintenance


EBR-2C MOA Tactical Reticle - Vortex Optics Diamondback Tactical 6-24x50 First Focal Plane Riflescopes

Compatible with select riflescope magnification rings with a diameter of 1. 81 inches / 46 mm. Constructed of skeletonized, lightweight hard-anodized aluminum, the SV-5 is one tough accessory that will serve you well. Strong o-ring seals and nitrogen purging guarantee waterproof and fogproof performance. Its relatively simple design places you firmly in the driver’s seat with the potential to take on that 1, 000 yard mark and beyond, at a price that’s easy to justify for new shooters, your training rifle, as well as experienced shooters looking for a back-to-basics optic on their fun gun.

Made in the USA. Maximize the efficiency of magnification transitions with fluid precision using our throw lever. Will only work with Picatinny spec mounts-will not work with Weaver mounts. Our precision matched rings are kept in pairs throughout the manufacturing process - ensuring perfection from one set to another.

We start with certified usa 7075 t6 billet aluminum and hold it to an extremely tight tolerance of. 0005 using our precision Computer Numeric Controlled CNC mill. These vortex rings are serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize. Sold two rings per package.

Exposed turrets bring tracking performance previously unheard of at this price point, while its optical system delivers sharp image quality even at extended range.


Similar products

Vortex Optics Tactical 30mm Riflescope Ring — Medium Height [0.97 Inches | 24.6 mm] - 2 Pack
Vortex Optics Defender Flip Cap - Eyepiece E-10 (41.5-46mm)
Vortex Optics Pro Series Riflescope Rings - 30mm - High Height [1.26 Inches | 32.0 mm]
Vortex Optics Riflescope Bubble Level 30-mm
Vortex Optics Pro Extended Viper 30mm Cantilever Mount
Vortex Optics Sport Cantilever 1-Inch Mount - 2-Inch Offset
Vortex Optics Precision Matched Rings 30mm - Height 0.97 inches
Wheeler Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance
Weaver Tactical Rings 30mm, Six Hole, Medium, Matte
Warnex 40mm Mounts 214M Warnex 40mm Mounts, Maxima Permanent Attachable Weaver Style rings, 30mm, Medium Height, Matte black


Vortex Optics Viper PST Gen II 5-25x50 FFP Riflescope EBR-2C MOA

Will only work with Picatinny spec mounts-will not work with Weaver mounts. Our precision matched rings are kept in pairs throughout the manufacturing process - ensuring perfection from one set to another. We start with certified usa 7075 t6 billet aluminum and hold it to an extremely tight tolerance of. 0005 using our precision Computer Numeric Controlled CNC mill.

These vortex rings are serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize. Sold two rings per package. Accuracy: ensure crosshairs are aligned for in line shot placement and reliable doping adjustments. Includes: a magnetized Action Level and a non-magnetized Scope Turret Level.

Compatible with select riflescope magnification rings with a diameter of 1. 81 inches / 46 mm. Constructed of skeletonized, lightweight hard-anodized aluminum, the SV-5 is one tough accessory that will serve you well. Versatility: adjustable barrel clamp level fits around even the largest diameter barrels, including shotguns.

Compact: small size allows for convenient storage and transport. The first focal plane, glass-etched reticle keep subtensions accurate throughout the 4x zoom range. The precision-glide erector system uses premium components in the zoom lens to ensure smooth magnification changes under the harshest conditions.




Similar products

Vortex Optics Precision Matched Rings 30mm - Height 1.45 inches
Vortex Optics Defender Flip Cap - Objective Lens O-50 (55-59 mm)
Vortex Optics Switchview Throw Lever SV-5 (1.81 in/46 mm) for Viper PST Gen II and Razor HD AMG Riflescopes
Vortex Optics Pro Extended Viper 30mm Cantilever Mount
Vortex Optics Riflescope Bubble Level 30-mm
Vortex Optics Riflescope Lo Pro Bubblevel 30-mm
Vortex Optics Precision Extended Cantilever Mount - 30mm - 20 MOA
Vortex Optics Torque Wrench Mounting Kit
Vortex Optics Precision QR Extended Cantilever 30mm Mount - 2-Inch Offset
Wheeler Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance


Vortex Optics Sure Fit Riflescope Cover - X-Large

Xr fully multi-coated lenses increase light transmission. Strong o-ring seals and nitrogen purging guarantee waterproof and fogproof performance. The viper pst gen ii takes incredible performance and rock solid tactical features to new heights. Compatible with select riflescope magnification rings with a diameter of 1.

81 inches / 46 mm. Constructed of skeletonized, lightweight hard-anodized aluminum, the SV-5 is one tough accessory that will serve you well. Made in the USA. Maximize the efficiency of magnification transitions with fluid precision using our throw lever. Includes: a magnetized Action Level and a non-magnetized Scope Turret Level.

The first focal plane, glass-etched reticle keep subtensions accurate throughout the 4x zoom range. The precision-glide erector system uses premium components in the zoom lens to ensure smooth magnification changes under the harshest conditions. Exposed tactical turrets and a side parallax knob give shooters the tools needed for long distance precision shooting.

Includes: 2 calibrated machined aluminum level housings, 1 foam-molded storage case. The fast focus eyepiece allows quick and easy reticle focusing. The single piece 30mm tube is shockproof, ruggedly built to withstand recoil and impacts. Compact: small size allows for convenient storage and transport.


Similar products

Vortex Optics Defender Flip Cap - Eyepiece E-10 (41.5-46mm)
Vortex Optics Switchview Throw Lever SV-5 (1.81 in/46 mm) for Viper PST Gen II and Razor HD AMG Riflescopes
Vortex Optics Riflescope Bubble Level 30-mm
Vortex Optics Precision Matched Rings 30mm - Height 0.97 inches
Vortex Optics Riflescope Lo Pro Bubblevel 30-mm
Vortex Optics Torque Wrench Mounting Kit
Vortex Optics Pro Series Riflescope Rings - 30mm - High Height [1.26 Inches | 32.0 mm]
Vortex Optics Hunter 1-inch Riflescope Rings - Medium Height (0.87 in)
Wheeler Engineering Professional Reticle Leveling System with Heavy-Duty Construction, Universal Design and Storage Case for Gunsmithing and Maintenance
Vortex Optics Viper PST Gen II 5-25x50 FFP Riflescope EBR-2C MOA


Wheeler Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance

Accuracy: ensure crosshairs are aligned for in line shot placement and reliable doping adjustments. Compatible with select riflescope magnification rings with a diameter of 1. 81 inches / 46 mm. Constructed of skeletonized, lightweight hard-anodized aluminum, the SV-5 is one tough accessory that will serve you well.

Ease of use: place the scope turret level on the top scope cap and the Action Level above the bolt; once the levels show a level scope, simply tighten the rings down. The switchview attaches and detaches easily to the magnification ring. Compatible with all configurations of Viper PST GEN II riflescopes. Compatible with all configurations of Razor HD AMG riflescopes.

Robust 6-screw tactical ring is perfect for mounting red-dot optics, magnifiers, and other accessories with 30mm tube diameters to your Picatinny rail. When using this ring to mount a conventional riflescope, we strongly recommend lapping the rings for a proper and secure fit for your optic. This vortex tactical ring positions the center of the riflescope tube at a height of 0

97 inches 24. 6 mm from the base. Sold two rings per package. Accuracy: each level has an integrated bubble level for precise measurement and the Reference Level has a magnetic bottom for added stability.


Similar products

Wheeler Engineering Level Level Level Scope Mounting Leveling Tool with Magnetic Base and Adaptable Design for Scope Mounting, Gunsmithing and Maintenance
Wheeler Engineering Professional Reticle Leveling System with Heavy-Duty Construction, Universal Design and Storage Case for Gunsmithing and Maintenance
Loctite Heavy Duty Threadlocker, 0.2 oz, Blue 242, Single
Wheeler Engineering 89-Piece Deluxe Gunsmithing Screwdriver Set with Durable Construction and Storage Case for Gunsmithing and Maintenance
Tipton Best Gun Vise for Cleaning, Gunsmithing and Gun Maintenance
Solid G Gunsmith level, professional Gunsmith Magnetic Leveling Tool ,Set of 2
Vortex Optics Precision Matched Rings 30mm - Height 0.87 inches
Vortex Optics Riflescope Bubble Level 30-mm
Arisaka Defense Optic Leveler Combo, Silver, OL-Combo
Vortex Optics Defender Flip Cap Set - Eyepiece E-10 (41.5-46mm) & Objective Lens Cover O-50 (55-59 mm)