Top 9 Chassis Paint Gloss Black – Automotive Body Paint


As an Amazon Associate I earn from qualifying purchases.

1. Magnet Paint

#ad

1 Gallon, Magnet Paint UCP99-01 Chassis Saver Rust Preventative Paint Gloss Black

#ad
Magnet Paint #ad - General maintenance - the ucp99 gloss black is the industry’s standard in high performance rust guard. Unafftected by other substances - this formula is unstoppable! Chassis Saver is unchanged by diesel fuel, solvents, hydraulic fluids, battery acids, corrosives, oils, road salt, gasoline, or chemicals.

Active guarding - proactively shields vintage trucks and automobiles underbody surfaces including frames, behind bumpers, trunk areas, floorboards, engine compartments, under fenders, fire walls, rocker panels, etc. Chassis paint finish wont crack, rain, flake, or peel. Easy to apply - make contact directly to rust spots or places to protect against rust; only requires minimal surface preparation using a wire brush; no hardeners, topcoats, primers, activators required.

Committed to total statisfaction - under the harshest condition, Chassis Saver has proven itself for over 10 years! Over 350 townships, local DOT fleet maintenance and public works departments use Chassis Saver. Protects from hard weather; snow, chip, mud, and dirt.
BrandMagnet Paint #ad
ManufacturerMagnet Paint Co #ad
Height7.7 Inches
Length6.7 Inches
Weight10 Pounds
Width6.7 Inches
Part NumberUCP99-01
ModelUCP99-01

2. KBS Coatings

#ad

KBS Coatings 8401 Gloss Black BlackTop Chassis Paint, 1 Quart

#ad
KBS Coatings #ad - Blacktop can be brushed, sprayed or rolled! The brush marks flow out and level! Rock hard permanent topcoat. Blacktop is a permanent, moisture-cured, UV stable coating primarily used for topcoating surfaces previously sealed with RustSeal or any other paint/primer application. Highly abrasion resistant and chemical resistant. Withstands high temperatures - 500F. Blacktop is a high performance protective coating specifically formulated to withstand dulling and fading caused by prolonged sunlight exposure. Flexible coating which expands and contracts.
BrandKBS Coatings #ad
ManufacturerKBS Coatings #ad
Height4.8 Inches
Length4.2 Inches
Weight2.35 Pounds
Width4.3 Inches
Part Number8401
Model8401

3. POR-15

#ad

1 quart, 32 fl. oz., POR-15 45904 Top Coat Chassis Black Paint

#ad
POR-15 #ad - Direct to metal DTM Rust Preventive Paint. No need for Primer or Undercoat. Uv resistant. Fit type: Vehicle Specific. Use over por-15 Rust Preventive.
BrandPOR-15 #ad
ManufacturerPOR-15 #ad
Height5 Inches
Length4.25 Inches
Weight1 Pounds
Width4.25 Inches
Part Number45904
Model45904

4. VHT

#ad

11 oz., VHT SP670 Gloss Black Roll Bar and Chassis Paint Can

#ad
VHT #ad - Does not require primer. Coating system products consist of paint and clear coat. Roll bar and chassis paint is a one step epoxy coating. This item is not for sale in Catalina Island. Baked-on finish that is chemical, corrosion, rust and salt resistant.
BrandVHT #ad
ManufacturerVHT #ad
Height7.95 Inches
Length2.61 Inches
Weight0.93 Pounds
Width2.61 Inches
Part NumberSP670
ModelSP670

5. Magnet Paint & Shellac

#ad

Magnet Paint Co Gloss Black Chassis SAVER1/2PT MPC-UCP99-16

#ad
Magnet Paint & Shellac #ad - Chassis saver is a high solids, voc compliant, single component chassis paint and underbody coating specially formulated to permanently stop automotive and truck corrosion without the use of primers or topcoats.

Chassis saver cures by reacting with atmospheric moisture and its cured film resembles that of a catalyzed finish yet no hardeners or activators are used. It works by isolating metal from oxygen and moisture, and without these factors present. Optimum results can be achieved by sandblasting a medium blast profile to surfaces. Chassis saver bonds to blasted and rusty metal to form a rock hard yet flexible, non-porous finish that won’t crack, glaze-like, chip, flake or peel.

Chassis saver’s unique rust stopping properties permit its application directly over tightly adhered rust after only marginal surface preparation using a wire brush and/or hand scraper to remove loose scale and rust particulate.
BrandMagnet Paint & Shellac #ad
ManufacturerMagnet Paint & Shellac #ad
Height3 Inches
Length2.9 Inches
Weight0.5 Pounds
Width2.9 Inches
Part NumberUCP99-16
ModelUCP99-16

6. Eastwood

#ad

Eastwood Extreme Chassis Black High Gloss Aerosol 14 oz Improves Chips Resistant

#ad
Eastwood #ad - 85% + gloss Level. Matches OEM automotive paint. Helps seal rust and improves resistance against chips and scratches. Apply multiple coats without lifting. Eastwood extreme chassis Black High Gloss Aerosol 14 oz Improves Chips Resistant.
BrandEastwood #ad
ManufacturerEastwood #ad
Weight1.13 Pounds
Part Number11172Z

7. Eastwood

#ad

Eastwood 2K Ceramic Chassis Black Gloss Qt Hardens Cures Single-Stage Paints

#ad
Eastwood #ad - Highly chip resistant. Dries Fast. Chemical-Resistant. Eastwood 2k ceramic chassis Black Gloss Qt Hardens cures single-stage paints. Incredibly UV-Resistant.
BrandEastwood #ad
ManufacturerEastwood #ad
Weight2 Pounds
Part Number50429ZP

8. Restoration Shop

#ad

8:1 Mix Ratio, 2.8 VOC, Truck, Equipment Coating, Car, Restoration Shop, Chassis Black Gloss Acrylic Enamel Auto Paint, Complete Gallon Paint Kit, Professional Single Stage High Gloss Automotive

#ad
Restoration Shop #ad - Restoration shop products are made in the u. S. A. Unlike many competitors. Our superior coating products only use the highest quality ingredients, which allows our customers to achieve consistent, and distribute our products throughout the USA, and we formulate, manufacture, high-quality professional results on all their painting projects!.

Ae is a very durable, cracking, chemical and solvent resistant coating that also resists chipping, and UV ray fading. Ae has an 8 to 1 mix ratio and is 2. 8 voc when used as packaged, as no reducer is required optional reducer sold separately. The kit provides over one gallon of sprayable material. The restoration shop ae acrylic enamel system is a professional easy-To-Use Single-Stage High Gloss Paint Coating System that is Designed for Overall Automotive Refinishing but is also used as a Fleet and Industrial Equipment Coating.

Ae paint kit includes 1 gallon of ae acrylic enamel paint color, 1 pint of ae3001 Wet Look Acrylic Hardener, 5 Pack of 190 Micron Nylon Automotive Strainers and a 5 Pack of Wood Paint Mixing Sticks. Ae is an easy to spray fast-drying topcoat system that provides a long-lasting and very high gloss finish result. Complete 1 gallon restoration shop acrylic enamel auto paint kit.
BrandRestoration Shop #ad
ManufacturerRestoration Shop #ad
Weight15 Pounds
Part NumberRSP AE1903-KIT-M

9. Eastwood

#ad

Eastwood Extreme Chassis Black High Gloss Qt Seal Rust Improves Chips Resistance

#ad
Eastwood #ad - 85% + gloss Level. Helps seal rust and improves resistance against chips and scratches. Apply multiple coats without lifting. Matches OEM automotive paint. Eastwood extreme chassis Black High Gloss Qt Seal Rust Improves Chips Resistance.
BrandEastwood #ad
ManufacturerEastwood #ad
Weight2.38 Pounds
Part Number11173ZP