Top 9 1/2-Inch Drive by 7/8-inch 22mm Offset Oxygen Sensor Socket – Automotive Replacement Oxygen Sensors

As an Amazon Associate I earn from qualifying purchases.

1. OEMTOOLS

#ad

Low Clearance Oxygen Sensor Socket Head with Cutaway Slot to Protect Wires | 1/2 Inch Drive & 22 mm 6 Point Offset | 1981 & Newer Automobiles, OEMTOOLS 25249 Oxygen Sensor Crowfoot Wrench | Compact

#ad
OEMTOOLS #ad - Knurled Grip. Compact, Low Clearance Head. Non-Impact. 1/2 inch drive, 22mm 7/8 Inch 6 Point Offset.
BrandOEMTOOLS #ad
ManufacturerGreat Neck Saw #ad
Height1.1 Inches
Length5.6 Inches
Width3.8 Inches
Part Number25249
Model25249
WarrantyOEMTOOL LimitedS Lifetime

2. KAX

#ad

All Vehicle O2 Sensor Removal and Installation, 7/8-Inch 22 mm Offset Oxygen Sensor Socket, O2 Sensor Socket Prevents Damage to Wires, KAX 1/2-Inch Drive, Wire Gate Accesses O2 Sensor from the Side

#ad
KAX #ad - The offset oxygen sensor socket accesses the sensor with wires from the side instead of the top, thereby preventing damage to the wires. If you are not completely satisfied with your purchase, please contact our support team and they will immediately resolve any issues you encounter.

Universal size: the universal 7/8 inch 22 mm hexagon is suitable for almost all oxygen sensors. High quality: the oxygen sensor socket is made of high-quality manganese steel, which allows the user to apply the maximum torque. High efficiency: the kax oxygen sensor socket is used with a 1/2 inch drive ratchet or a 7/8 inch torque wrench. Even if you have no operating experience, it can help you remove or install oxygen sensors reliably and efficiently. The tool meets and exceeds ANSI/ASME standards.

A high-quality oxygen sensor socket can save you time! Buy with confidence: kax is committed to the concept of customer first. At the same time, precision casting can ensure strength and precise coordination for loading and unloading. Easy to install and unload: the slotted design of the offset oxygen sensor socket allows the oxygen sensor to be removed or installed while the wiring harness is connected, which provides additional leverage and can be easily removed even in hard-to-reach places.
BrandKAX #ad
ManufacturerKAX #ad
Part NumberKX2SO2121001

3. Apeixoto

#ad

Preventing Damage to Wires, AP1822F 3/8-inch Drive by 7/8-inch 22mm Offset Oxygen Sensor Socket High-performance chrome molybdenum steel construction Wire Gate Accesses Sensor from The Side

#ad
Apeixoto #ad - This tool meets and exceeds ANSI/ASME standards. Design: our socket's slotted design allows you to remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots. Apeixoto offers a full line of oxygen sensor tools including our complete ap1822F Oxygen Sensor Socket set that features thread chasers, oxygen sensor sockets and more! Function: even if you don't have a lot of experience working with cars, you can replace your O2 sensor with this tool to help with your car's emissions and gas mileage.

Quality:this socket made from premium chrome molybdenum steel, the socket allows users to exert maximum torque while the precision casting ensures accurate fit and function. Lifetime warranty - this air door actuator comes complete with a lifetime warranty.

If the part ever fails simply contact us for a replacement for FREE. 22mm socket fits most oxygen sensors, Offset drive with wire gate accesses sensor from the side, Common 6 point, not the top, preventing damage to wires. The sensors live in the harshest of environments and may require some elbow grease to remove, Use with any 3/8 inch drive ratchet or breaker bar, but this quality tool can save your knuckles and save you time! Features:removes and installs oxygen sensors on vehicles with computer-controlled engines, 7/8 in.
BrandApeixoto #ad
ManufacturerApeixoto #ad
Part NumberAP1822F
Model.

4. Carock

#ad

CAROCK 22mm 1/2 Inch Drive O2 Oxygen Sensor Wrench Offset Removal Socket Replace Tool

#ad
Carock #ad - Common 6 point, 7/8 in. Removes and installs oxygen sensors on vehicles with computer-controlled engines. Used with any 3/8" drive ratchet or breaker bar. Suitable for both heated and unheated oxygen sensors. 22mm socket fits most oxygen sensors. The offset design helps you reach oxygen sensors in tough-to-reach spots compared to standard wrenches.
BrandCarock #ad
ManufacturerCAROCK #ad
Part Number02CR-TL01009

5. 8MILELAKE

#ad

8milelake 3/8 inches Drive by 7/8 inches 22mm Offset Oxygen Sensor Socket

#ad
8MILELAKE #ad - The size of the open side is 8 mm, the length: 80mm. Constructed from drop forged, heat treated, chrome vanadium steel. Common 6 point, 7/8 in. Side cutout prevents damage to wires. Removes and installs oxygen sensors on vehicles with computer-controlled engines. 22mm socket fits most oxygen sensors.
Brand8MILELAKE #ad
Manufacturerfreebirdtrading #ad
Height1.57 Inches
Length3.15 Inches
Weight0.44 Pounds
Width1.57 Inches
Part NumberSZ
ModelSZ

6. OEMTOOLS

#ad

3/8 Drive and 1/2 Drive, Oxygen Sensor Removal Kit, 3 Piece Socket Set with Case, O2 Sensor Socket 22mm 7/8, OEMTOOLS 27110 Oxygen Sensor Socket Set

#ad
OEMTOOLS #ad - A good fit for most cars: these 7/8" 22 mm o2 sockets are the right size for most domestic and many imported vehicles; Chances are these oxygen sensor removers will fit not just your car, friends, but those of your neighbors, and family.

Replace any o2 sensor with ease: all three sockets in this oxygen sensor socket set feature a cutout design to keep the sensor wire intact; An offset socket in two drive sizes, 3/8 and 1/2, allows for easy access at difficult angles. Full specifications: set includes 3/8" drive 7/8" 22 mm deep socket, 3/8" drive 7/8" 22 mm Crowfoot Socket, 1/2" drive 7/8" 22 mm Deep Crowfoot Socket, and a storage case; Sockets have chrome plating and a black oxide finish.

An open-and-shut case: the included sturdy case enables easy portability; The tough red exterior and easy to read label help you protect, store, and find this O2 socket set in a garage full of automotive tools. Strong sockets for tough sensors: covered in chrome plating and a black oxide finish, these OEMTOOLS sockets remove hard to budge sensors with or without the help of penetrating oil or heating techniques; They also service hex vacuum switches.
BrandOEMTOOLS #ad
ManufacturerOEM #ad
Height1.7 Inches
Length9 Inches
Weight1.55 Pounds
Width3.8 Inches
Part Number27110
Model27110
WarrantyOEMTOOLS Limited Lifetime

7. Kwiksen

#ad

Kwiksen 70039 | 3/8-inch Drive by 7/8-inch 22mm Offset Oxygen Sensor Socket Wrench Removal Tool

#ad
Kwiksen #ad - Designreplacement for 70039 47749 648691 12230 70094 13474 27162 648442. Qualitymanufactured with high-temperature stainless steel to bring longer lifespan. Warrantyyour satisfaction is our target to achieve.

So, just return it and get a full refund, if you have any question please contanct with us, if you don't like it, we are waiting for your coming, we will provide quality service for you. Easy to useadapted to all oxygen sensor, like 15719 15718 15717 15716 234-4668 15717 234-4162 234-4797 234-9051 17025 234-4260 234-4209 234-4588 234-9009 15716 13026 15703 15719 234-4018 234-5010 15664 15510 234-4622 17018 234-4154 13231 234-4621 24642 213-1325 234-9005 234-4800 27110 17098 23099 234-4099 234-4169 17321 213-3533 250-25005 234-4012 13100 afs106 234-4092 afs123 15718 23135 234-4132 234-4445 13675 15896 60012 21003 23159 213-4537 13477 13138 234-4261 234-9007 15895 234-4626.

Size7/8 in(22mm)hexagon fits almost all oxygen sensors,3/8 in drive for ratcheting Handle,it will be very convenient to install o2 sensor.
BrandKwiksen #ad
ManufacturerKwiksen #ad
Part NumberGQLG-0434972587

8. TEKTON

#ad

TEKTON 3/8 Inch Drive x 7/8 Inch Offset 6-Point Oxygen Sensor Socket | 47749

#ad
TEKTON #ad - High-performance chrome molybdenum steel construction. Common 6 point, 7/8 in. Length: 2. 2 in. Width: 1. 4 in. Height: 1. 2 in. 22mm socket fits most oxygen sensors. High-contrast, permanent, laser etched size markings are easy-to-read, even in low light. Removes and installs oxygen sensors on vehicles with computer-controlled engines. Offset drive with wire gate accesses sensor from the side, not the top, preventing damage to wires. Use with any 3/8 inch drive ratchet or breaker bar.
BrandTEKTON #ad
ManufacturerTEKTON #ad
Height1.2 Inches
Length2.2 Inches
Weight0.34 Pounds
Width1.4 Inches
Part Number47749
Model47749
WarrantyAlways Guaranteed: [email protected]

9. TEKTON

#ad

TEKTON 3/8 Inch Drive x 7/8 Inch 6-Point Oxygen Sensor Socket | 4929

#ad
TEKTON #ad - Drive ratchet or breaker bar. 22mm socket fits most oxygen sensors. Removes and installs oxygen sensors on vehicles with computer-controlled engines. Length: 3. 3 in. Width: 1. 4 in. Height: 1. 4 in. Side cutout prevents damage to wires. Use with any 3/8 in. High-contrast, permanent, laser etched size markings are easy-to-read, even in low light. Constructed from drop forged, heat treated, chrome vanadium steel. Common 6 point, 7/8 in.
BrandTEKTON #ad
ManufacturerTEKTON #ad
Height2 Inches
Length5.75 Inches
Weight0.55 Pounds
Width1.75 Inches
Part Number4929
Model4929
WarrantyAlways Guaranteed: [email protected]