As an Amazon Associate I earn from qualifying purchases.
If the turbocharger speed sensor dodge charger failed, you should replace it quickly. This avoids leakages and air turbulence while allowing the housing to be compact in size. The compatibility information provided is for reference only. Notice: please double check your model in the fitment filter system ram 2500 accessories.
The cummins turbocharger ecm engine control module interprets this signal and converts it to a turbocharger speed reading, which helps prevent excessive turbo RPM’s that can cause turbo and/or engine damage. The target on the turbocharger shaft is a ground flat surface in the center of the shaft. Customers can find the product they need accurately according to the OE number dodge ram 2500 accessories. Plug and play for ease of installation.
nibbi #ad - 4. Easy tuning with jetting parts. 3. Available in four popular sizes to cover all your horsepower requirements. 2. Chromed round-flat throttle valve for excellent response and more flow at high RPM.
HIAORS #ad - Eye to eye : 30mm. Fit 420 Chain. 14t. Please check the Size Before You Buy It. Countershaft Width 17mm.
ZXTDR #ad - Upgrade your stock 50cc to this 125cc monster, you can feel the power difference immediately. See below description for more specifications and wiring. This 125cc semi-auto engine suitable for ATV UTV 4 Wheelers Quad bikes. Speed complete racing engine, 3 forward 1 reverse gear.
Paint warning: | * these headers are painted with a high heat dull black paint | * it will generally dull even more when the engine is started | * The header paint will smoke and let off an odor the first few times the engine is up to temperature and the black finish will become duller turning closer to gray in color | * If exhaust temperatures are extreme at start the paint will blister and peel | * There is no warranty on header paint.
Features 1-5/8" tubes with 2-1/2" collectors, and includes a pair of 2-1/2" to 2-1/4" reducers to complete the installation | * designed primarily for engines with front mounts, complete with header bolts and gaskets and reducer bolts and gaskets | * these headers are Ground parallel with. 350" flanges on the cylinder head surface, and will require a starter that is 6-1/2" or less from back of mounting flange to front of starter | * you must use mini-starter # pmm 9503 with an Automatic Transmission and 5 Speed Manual Transmissions | * If you running a 3 or 4 Speed Manual Transmission then you must use Mini-Starter # PMM 9504 Mini-Starter | * Note: We strongly suggest you refer to measurement chart below to insure headers will fit your vehicle and application, in many instances these headers will fit and function perfectly with side mounts and under engine cross members | * These Headers Cannot be used with a Stock Ford Starter, before ordering.
Michigan Motorsports #ad - These cams are designed specifically for 4. 8 5. 3 6. 0 combinations. Beehive valve springs, Set of 16 Hat Seals. These camshafts have a 3-bolt timing gear pattern. With a 112 lobe separation angle LSA.
And crank bolt & gaskets for Water Pump, & Front Seal. This cam gained 53. 4 hp and 22. 0 tq at the flywheel on our in-house SuperFlow 902 engine dyno using an otherwise stock 5. 3l engine! this cam uses proprietary tsp lobe profiles that are designed to utilize the factory gm ls6 single beehive valve springs and your factory pushrods, making them the most affordable cam package on the market! 1400-6000 rpm power band; this is an excellent performance camshaft with a slight lope at idle! We've had tons of customers select this camshaft when looking for a cam that drives well and can be daily driven without any issues! A mail-order or dyno tune will be required for optimum performance and excellent driving quality.
Texas speed stage 3 low lift 216/220, timing cover,. 550"/. 550" camshaft 112 lsa camshaft.
GOOACC #ad - The clips are widely used for radiator yoke trim panel door trim door panel bumper car fender flare side skirt grille wheel well air intake engine cover mud flap and splash guard shield retainers rivet clips replacement.
Fits infiniti g35 g37 fx35 fx45 ex35 nissan 370Z 350Z see details. Brand new engine splash shield Bolts Hardware Kit Fender Bumper Clips Rivets direct replacement and perfect fitment.
Hoedia #ad - Material - this gasoline engine spring set is made of high-quality metal material, not easy to wear or fracture, firm and stable. Flexible elasticity, long service life. And these spring kits are manufactured by a standard industrial process and meet the standard.
Install - this throttle spring is easy to install, saving time and energy. Application - the throttle return spring set is suitable for gasoline generators 2-3KW and fuel engines 168F/ GX160/ GX200/ 170F/ GX210, polishing machines, snow blowers, car washing machines, such as gasoline pumps, sewing machines, garden machines, etc.
1. Platinum Performance Parts
#adTurbocharger Speed Sensor Compatible with 2007-2011 Dodge Ram 6.7 Cummins 2500 3500 turbo charger speed sensor Dodge Ram Diesel 6.7L Engine Replaces OEM part 68039104AA 68039104AB
#adPlatinum Performance Parts #ad - High quality material - turbocharger sensors are critical in accurately identifying how fast the turbo is spinning and where your engine is operating on the compressor map. Made of fine quality material, practical to use meets or exceeds OEM standards, 100% tested before shipping.If the turbocharger speed sensor dodge charger failed, you should replace it quickly. This avoids leakages and air turbulence while allowing the housing to be compact in size. The compatibility information provided is for reference only. Notice: please double check your model in the fitment filter system ram 2500 accessories.
More information #ad
The flat surface on the turbocharger ram truck shaft spins past the speed sensor ram 2500 diesel, a signal is generated. Turbo charger 100% testing and calibration during the manufacturing process for reliability, durability, and performance. The cummins turbocharger ecm engine control module interprets this signal and converts it to a turbocharger speed reading, which helps prevent excessive turbo RPM’s that can cause turbo and/or engine damage. The target on the turbocharger shaft is a ground flat surface in the center of the shaft. Customers can find the product they need accurately according to the OE number dodge ram 2500 accessories. Plug and play for ease of installation.
| Brand | Platinum Performance Parts #ad |
| Manufacturer | Platinum Performance Parts #ad |
| Part Number | PLAT-6.7-TSS |
More information #ad
2. nibbi
#adNIBBI Racing Parts Original Replacement High Performance Speed Modified Carburetor Kit PE26MM GY6 Curved Pipe Throttle Cable High Flow Air Filter 48MM Fit GY6 Engine Scooter 100CC 125CC 150CC
#adMore information #ad
5. Fit for 2t and 4T engine. 1. Nibbi pe carburetor is refined to perfection and has set the standard among scooter and motocross racing carburetors.| Brand | nibbi #ad |
| Manufacturer | NIBBI #ad |
| Part Number | NIBBI-PE26-02 |
More information #ad
3. HIAORS
#adHIAORS 420 14T 17mm Motorcycle Front Engine Sprocket for 50cc 70cc 110cc 125cc 140cc 160cc Honda HONDA Z50 CT70 Speed Mini Bike TaoTao Roketa Coolster Sunl Lifan Chinese ATV Quad Dirt Bike
#adMore information #ad
| Brand | HIAORS #ad |
| Manufacturer | HIAORS #ad |
| Part Number | EG420-14T-17mm |
More information #ad
4. ZXTDR
#adZXTDR 125cc Engine 4-Stroke Motor Semi-Auto 3 Forward 1 Reverse Gear for ATV 4 Wheelers Tricycle
#adMore information #ad
| Brand | ZXTDR #ad |
| Manufacturer | ZXTDR #ad |
| Part Number | U--TD205-1 |
More information #ad
5. Southwest Speed
#adRAT ROD, VINTAGE, NEW SOUTHWEST SPEED BLACK BLOCK HUGGER SHORTY STYLE HEADERS FOR SMALL BLOCK FORD 260-351 WINDSOR & GT40P V8 ENGINES, STREET ROD, HOT ROD, NOSTALGIA, 1 5/8" TUBES
#adSouthwest Speed #ad - Applications: | * c. I. D. Features: | * ideal for engine swaps | * great for street rods | * tightest fitting and most compact header we sell | * great choice to replace stock cast iron exhaust manifolds | * More Performance | * Better fuel mileage | * 1-5/8" tubes with 2-1/2" collectors | * Includes a pair of 2-1/2" to 2-1/4" reducers | * Includes header bolts and gaskets and reducer bolts and gaskets | * Painted Flat Black to resist early corrosion. 262, 350, recommended 65 mustang 289 engine mounts 400-7034 and 400-7035 | * left hand, 265, 400 | * fits all small block chevrolet v-8 engines with standard exhaust pattern | * important: | * requires pmm 9503 mini-starter with automatic transmission and 5 speed | * Requires PMM 9504 Mini-Starter with 3 and 4 Speed Manual Transmission | * Recommended engine mounts 400-7034 and 400-7035 Left Engine Mount may need to be ground 1/4" to clear collector | * Exclusions: | * Cannot use Stock Ford Starter, 327, 283, 302, requires mini-starter pmm 9504 | * will not work with large side engine mounts, drivers side | * Mount may need to be ground 1/4" to clear collector.Paint warning: | * these headers are painted with a high heat dull black paint | * it will generally dull even more when the engine is started | * The header paint will smoke and let off an odor the first few times the engine is up to temperature and the black finish will become duller turning closer to gray in color | * If exhaust temperatures are extreme at start the paint will blister and peel | * There is no warranty on header paint.
More information #ad
Pair of brand new southwest speed flat black block hugger shorty headers for small block ford 260-351ci windsor and gt40p engines sWS Part # 440-2499 | * This Pair of Southwest Speed Block Hugger Shorty Headers are great for close or tight fit applications | * They will work for installing Small Block Ford Engines in many different applications and are great for engine swaps where a specifically designed header is not available. Features 1-5/8" tubes with 2-1/2" collectors, and includes a pair of 2-1/2" to 2-1/4" reducers to complete the installation | * designed primarily for engines with front mounts, complete with header bolts and gaskets and reducer bolts and gaskets | * these headers are Ground parallel with. 350" flanges on the cylinder head surface, and will require a starter that is 6-1/2" or less from back of mounting flange to front of starter | * you must use mini-starter # pmm 9503 with an Automatic Transmission and 5 Speed Manual Transmissions | * If you running a 3 or 4 Speed Manual Transmission then you must use Mini-Starter # PMM 9504 Mini-Starter | * Note: We strongly suggest you refer to measurement chart below to insure headers will fit your vehicle and application, in many instances these headers will fit and function perfectly with side mounts and under engine cross members | * These Headers Cannot be used with a Stock Ford Starter, before ordering.
| Brand | Southwest Speed #ad |
| Manufacturer | Southwest Speed #ad |
| Height | 0 Inches |
| Length | 0 Inches |
| Weight | 0 Pounds |
| Width | 0 Inches |
| Part Number | 440-2499 |
| Model | 440-2499 |
| Warranty | Paint Warning:
|
More information #ad
6. Michigan Motorsports
#adSprings and Gasket Kit, Set of 16 and Gasket Set Kit Camshaft, Texas Speed TSP Stage 3 Low Lift Truck Camshaft Vortec Truck Cam 3 Bolt Cam 4.8 5.3 6.0,Includes GM LS6 Single Beehive Valve Springs
#adAnd crank bolt & gaskets for Water Pump, & Front Seal. This cam gained 53. 4 hp and 22. 0 tq at the flywheel on our in-house SuperFlow 902 engine dyno using an otherwise stock 5. 3l engine! this cam uses proprietary tsp lobe profiles that are designed to utilize the factory gm ls6 single beehive valve springs and your factory pushrods, making them the most affordable cam package on the market! 1400-6000 rpm power band; this is an excellent performance camshaft with a slight lope at idle! We've had tons of customers select this camshaft when looking for a cam that drives well and can be daily driven without any issues! A mail-order or dyno tune will be required for optimum performance and excellent driving quality.
More information #ad
Texas speed stage 3 low lift 216/220, timing cover,. 550"/. 550" camshaft 112 lsa camshaft.
| Brand | Michigan Motorsports #ad |
| Manufacturer | Texas Speed #ad |
| Part Number | TSP 25-TSPLL216220 |
More information #ad
7. GOOACC
#adBlack, GOOACC GRC-70 35PCS Engine Under Cover Splash Shield Guard Body Bolts Bumper Fender Liner Push Retainer Fastener Rivet Clips
#adFits infiniti g35 g37 fx35 fx45 ex35 nissan 370Z 350Z see details. Brand new engine splash shield Bolts Hardware Kit Fender Bumper Clips Rivets direct replacement and perfect fitment.
More information #ad
The extruded u-nuts can be used to replace/fix to the bumper. Package includes 10pcs extruded u-nuts - replace/fix to the bumpercorrosion resistant 15pcs Body Bolts with Built-in Fender Washer CORROSION RESISTANT 10pcs Plastic Push Clips as pictured.| Brand | GOOACC #ad |
| Manufacturer | GOOACC #ad |
| Part Number | GRC-70 |
| Model | GRC-70 |
| Warranty | 2 Years Warranty |
More information #ad
8. Hoedia
#ad24PCS Throttle Return Spring Linkage Kit Connecting Rod Speed Control Spring Carburetor Spring Classification Governor Spring Compatible with 168F/ GX160/ GX200/ 170F/ GX210,Gasoline Engine
#adInstall - this throttle spring is easy to install, saving time and energy. Application - the throttle return spring set is suitable for gasoline generators 2-3KW and fuel engines 168F/ GX160/ GX200/ 170F/ GX210, polishing machines, snow blowers, car washing machines, such as gasoline pumps, sewing machines, garden machines, etc.
More information #ad
Size - the throttle return spring kit size - throttle return springs:117mm;speed control springs:105mm;adjustment levers:165mm. Package - you will get 24pcs throttle return spring linkage total included 8pcs throttle return springs, 8pcs speed control springs and 8pcs adjustment levers.| Brand | Hoedia #ad |
| Manufacturer | Hoedia #ad |
| Part Number | YXW-Throttle Return Spring |
More information #ad
