As an Amazon Associate I earn from qualifying purchases.
MS MASTER SHOW #ad - Notice: a few car models might not be adaptable, such as cup holders with unique shapes, inclined angles or with flip lids and so on. Please confirm the car models before purchase. The extendable base allows the adapter to stay firmly in place. What’s more, in order to reduce the noise during driving, a coaster is equipped in each single cup holder.
Hold your bottles/cups/mugs tightly: the u-shaped slot on the cup holder expander allows mugs to be fit in and the 4 rubber tabs attached to the cup holder help stabilize the bottles/cups/mugs to effectively protect them from tipping or splashing. Just rotate cup holder until prongs extend and tighten against your car's center console cup holder.
Fit for large bottles in 3"- 4" diameter: the cup holder expander of upgraded version is compatible with bottles, cups, mugs of most popular brands in 3’’-4’’ diameter, thermoses, especially for oversized/larger one. Upgraded offset function: the new version cup holders has been updated as the position between the rotating base and the cup body can be adjusted by a screwdriver to make that two cup holders fit side by side and avoid affecting the use of adjacent cup holder, center console, gear shifter and car dash.
Camco #ad - Fully sealing gasket. Double-wall insulation, won't sweat. 20 oz. Stainless steel design, Green. Extreme durability. Tumbler.
MS MASTER SHOW #ad - Compatibility：the upper cup holder measures 3’’in diameter, while the lower cup holder measures 4’’in diameter, hydro flasks 32/40 oz, which is suitable for regular bottles within 3’’ in diameter, which is for larger bottles, so far is Compatible with Yeti 20/26/30 oz, mugs or cups between 3.
4"- 3. 7" diameter, nalgenes 30/32/38/48 oz and Camelbak 32/40 oz. Suitable for most car models: the universal design makes it applicable for most car cup holders, inclined angles, such as cup holders with unique shapes, with flip lids, which may not be compatible with the cup holders of a few car models, or are located where the dashboard hangs over the cup holder.
It can be placed such as snacks, burgers, napkins, etc. Just rotate cup holder until prongs extend and tighten against car's cup holder. Only three steps: first, rotate the cup holder expander until prongs extend and tighten against car’s cup holder, which is sturdy, then inserted the tray into the slot. Car cup holder expander：the car cup holder expander expands from 2. 6’’ to 3. 9’’. Easy to install：both the base and the tray are made of high-quality abs resin, easy to assemble/dissemble and clean.
Swigzy #ad - Extender designed for almost any size bottles: the multi-length rubber tabs allow the adapter to work with bottles/cups 2. 8"-3. 85" in diameter and fits most 20oz. Slot on side allows mugs with handles to fit. One year warranty: the adapter is designed to handle even the most rugged driving conditions.
Bottom base can be offset with a single adjustment bolt: the adapter can then be positioned so that it will not block the adjacent cup holder, two adapters can be used side by side, emergency brake, dash, and the adapter can still work where a center console lid, or lid covering the car’s cup holders would normally prevent the adapter from fitting properly.
40 oz. Our extra thick pads on the expanding base ensure the adapter stays securely in your cup holder. Extendable base: insert is expandable from 2. 6"-3. 8" in diameter to fit many different automotive cupholders. We stand behind our product 100%. This ensures the adapter will not come out of your car’s cup holder when you remove the bottle to take a drink. Rubber tabs securely hold 2.
LITTLEMOLE #ad - Foldable-the drink holder can be folded when not in use, Save space in the car. Stable-the car cup holder can be placed on the both sides of the door side, when the car is in the driving process, heavy drinks will not be overflowed.
Durable and sturdy-manufactured from high quality ABS material, this window cup holder is durable, sturdy, wear-resistant to use.
Klein Tools #ad - Cooler supports up to 300 pounds 136. 1 kg; not only does this carry lunch, it doubles as a handy place to sit. Shoulder strap holds lid in place while carrying and easily converts to a handle.
Lid stays open at 90-degrees to allow uninterrupted access; no rust stainless steel hinged lid is recessed to accommodate 1 Liter water bottles.
The LEDGE The Best Auto Cup Holder #ad - Please contact us for assistance! The ledge has a protective felt strip alongside the window insert to cushion between the cup holder and glass. This is a large cup holder, top-heavy beverages.
The patented design secures large, be cautious with hot liquids in The LEDGE. There really is a difference! made in texas, usa and family operated!! installation may take more effort than expected and videos are available on this listing, on our Facebook page and website.
Moolily #ad - The car coasters are a universal size, but we still recommend measuring for your vehicle as every car is different. Dry it in the wind or sunshine. High quality the car cup mat Made of high quality silicone, no deformation, soft, no discoloration, back anti Slip.
Wide compatibility the coasters diameter 2. 75 inch, thick 02inch. Easy to clean these car cup mats can easily wash in the water and brush it to clean.
Autrends #ad - Window drink holder: fits regular sized cans, water bottle and juice boxes diameter up to 3 inches. Cup holders: keep your favorite refreshments close by with this cup holder; Some feature storage options for phones and accessories.
2CUPS #ad - Measurements: 2cups holder measures 8. 1 x 4. 2 x 8. 5 inches l x w x H; Tray measures 9. 9 x 6. 5 x 2 inches. Solid base: adjustable base adapter expands from 2. 7 inches to 4 inches, providing a sturdy base; installs easily by rotating adjustment dial; silicone pads on extenders provide grip.
The original cup holder expander with attachable tray. Tray for extra storage: tray attaches to upper cup holder providing a convenient place for your favorite snacks, keys, phone and other loose items; no more searching and reaching while driving; spin the tray to fit on your position.
5 - 4 inches wide, hydro flasks, klean kanteens, such as 30 oz yeti ramblers and jumbo water bottles; rubber base pad keeps bottles stable; attached UPPER CUP HOLDER for 12 oz – 32 oz tumblers / bottles / bottles / cups up to 3 inches wide fits most Yeti Ramblers, contigo tumblers, and Nalgenes. Fit: some cars' cup holders are at an angle, in recessed basins or concealed in compartments; please make sure to measure your vehicles' cup holder to ensure fit.
1. MS MASTER SHOW
#adMaster Show Upgraded Cup Holder Expander for Car Car Cup Holder with Expandable Base Fit for Large Water Bottles Mugs Coffee Cups in 3"-4" Diameter.1
#adHold your bottles/cups/mugs tightly: the u-shaped slot on the cup holder expander allows mugs to be fit in and the 4 rubber tabs attached to the cup holder help stabilize the bottles/cups/mugs to effectively protect them from tipping or splashing. Just rotate cup holder until prongs extend and tighten against your car's center console cup holder.
More information #ad
Easy to install: both the base and cup holder are made of high-quality ABS, which is sturdy, durable and easy to install. Compatibie with diameter 2. 5"-3. 75" car’s cup holder: the car cup holder expander expands from 2. 5" to 3. 75", such as boats, which can be fit in different vehicles with cup holder, trucks, RV's and golf-carts. Fit for large bottles in 3"- 4" diameter: the cup holder expander of upgraded version is compatible with bottles, cups, mugs of most popular brands in 3’’-4’’ diameter, thermoses, especially for oversized/larger one. Upgraded offset function: the new version cup holders has been updated as the position between the rotating base and the cup body can be adjusted by a screwdriver to make that two cup holders fit side by side and avoid affecting the use of adjacent cup holder, center console, gear shifter and car dash.
| Brand | MS MASTER SHOW #ad |
| Manufacturer | Master Show #ad |
| Part Number | Master Show-112 |
| Model | A-111 |
| Warranty | No |
More information #ad
2. Camco
#adGreen 53063, Leak Proof Lid, Great For Hot and Cold Drinks, Won't Sweat, Camco Life is Better at The Campsite Stainless Steel 20 oz. Tumbler with Double Wall Insulation
#adMore information #ad
| Brand | Camco #ad |
| Manufacturer | Camco #ad |
| Height | 4 Inches |
| Length | 7 Inches |
| Weight | 0.74 Pounds |
| Width | 4 Inches |
| Part Number | 53063 |
| Model | 53063 |
More information #ad
3. MS MASTER SHOW
#adMaster Show Cup Holder Tray for Car Cup Holder Expander with Detachable Tray Table Car Drink Holders Compatible with Yeti 20/26/30 oz Hydro Flasks 32/40 oz Camelbak 32/40 oz
#ad4"- 3. 7" diameter, nalgenes 30/32/38/48 oz and Camelbak 32/40 oz. Suitable for most car models: the universal design makes it applicable for most car cup holders, inclined angles, such as cup holders with unique shapes, with flip lids, which may not be compatible with the cup holders of a few car models, or are located where the dashboard hangs over the cup holder.
More information #ad
Put the included tray pad and coaster to the corresponding position, and the installation is complete. It can be placed such as snacks, burgers, napkins, etc. Just rotate cup holder until prongs extend and tighten against car's cup holder. Only three steps: first, rotate the cup holder expander until prongs extend and tighten against car’s cup holder, which is sturdy, then inserted the tray into the slot. Car cup holder expander：the car cup holder expander expands from 2. 6’’ to 3. 9’’. Easy to install：both the base and the tray are made of high-quality abs resin, easy to assemble/dissemble and clean.
| Brand | MS MASTER SHOW #ad |
| Manufacturer | master show #ad |
| Part Number | SZH10763 |
| Model | SZH10763/SZH10763X2 |
| Warranty | no |
More information #ad
4. Swigzy
#adNalgene, Swigzy Car Cup Holder Expander Adapter Adjustable, Holds Hydro Flask, Large 32/40 oz. Bottles & Big Drinks, Yeti
#adBottom base can be offset with a single adjustment bolt: the adapter can then be positioned so that it will not block the adjacent cup holder, two adapters can be used side by side, emergency brake, dash, and the adapter can still work where a center console lid, or lid covering the car’s cup holders would normally prevent the adapter from fitting properly.
More information #ad
Just twist the top of the adapter to expand or retract the base. 40 oz. Our extra thick pads on the expanding base ensure the adapter stays securely in your cup holder. Extendable base: insert is expandable from 2. 6"-3. 8" in diameter to fit many different automotive cupholders. We stand behind our product 100%. This ensures the adapter will not come out of your car’s cup holder when you remove the bottle to take a drink. Rubber tabs securely hold 2.
| Brand | Swigzy #ad |
| Manufacturer | Swigzy #ad |
| Height | 6.25 Inches |
| Length | 4.4 Inches |
| Weight | 0.59 Pounds |
| Width | 4.4 Inches |
| Part Number | CH-1 |
| Model | 13 |
| Warranty | Manufacturer warrant for 1 year from date of purchase. |
More information #ad
5. LITTLEMOLE
#adWater Bottles, Soda Cans, Adjustable Folding Drink Holder for Truck Interior, LITTLEMOLE Car Cup Holder, Coffee, Vehicle Door Cup Holder
#adDurable and sturdy-manufactured from high quality ABS material, this window cup holder is durable, sturdy, wear-resistant to use.
More information #ad
Easy to install-the bottle mount can be installed easily by sliding between your door panel and window that is easy to take and reach. Adjustable-the cup holder fits regular sized cans, coffee cup, water bottle and juice boxes within 3 inches in diameter.| Brand | LITTLEMOLE #ad |
| Manufacturer | LITTLEMOLE #ad |
| Part Number | LM775S |
| Model | LM775S |
| Warranty | 1 |
More information #ad
6. Klein Tools
#ad17-Quart Lunch Box Holds 18 Cans, Klein Tools 55600 Work Cooler, Tradesman Pro Tough Box, Keeps Cool 30 Hours, Seats 300 Lb
#adLid stays open at 90-degrees to allow uninterrupted access; no rust stainless steel hinged lid is recessed to accommodate 1 Liter water bottles.
More information #ad
Lock hasp fits #1 Master Lock or equivalent not included. Lunch box keeps cool up to 30 hours; main compartment has a 17-Quart 16. 1 l, 18 can capacity. Inside storage compartment, lid opens full 180-degrees to access and holds items like phone, medicine, utensils, napkins, keys, etc.| Brand | Klein Tools #ad |
| Manufacturer | Klein Tools #ad |
| Height | 13.5 Inches |
| Length | 16.75 Inches |
| Weight | 6.8 Pounds |
| Width | 12.5 Inches |
| Part Number | 55600 |
| Model | 55600 |
| Warranty | 1 Year Manufacturer |
More information #ad
7. The LEDGE The Best Auto Cup Holder
#adThe LEDGE The Best Auto Cup Holder Large Cup Holder for Yeti's, Hydro flasks, Large Bottled Drinks, Big Gulps, Big Mugs
#adThe patented design secures large, be cautious with hot liquids in The LEDGE. There really is a difference! made in texas, usa and family operated!! installation may take more effort than expected and videos are available on this listing, on our Facebook page and website.
More information #ad
Fits snugly between the window glass and rubber seal of MOST vehicles. The ledge’s sturdy, patented design prevents top heavy drinks from tipping over and falling out like similar cup holders do. Please see dimensions in pictures. Braking and potholes have met their match! Due to the possibility of sloshing, accurate detailed measurements are listed in product pictures.| Brand | The LEDGE The Best Auto Cup Holder #ad |
| Manufacturer | VJP Products LLC #ad |
| Height | 5.75 Inches |
| Length | 6.75 Inches |
| Width | 4.25 Inches |
| Part Number | TL01 |
More information #ad
8. Moolily
#ad2PC Car Logo Vehicle Travel Auto Cup Holder for Jeep Wrangler Accessories for Jeep Grand Cherokee Logo Styling Decoration Accessories
#adWide compatibility the coasters diameter 2. 75 inch, thick 02inch. Easy to clean these car cup mats can easily wash in the water and brush it to clean.
More information #ad
Practical function installation of cup mat can effectively reduce the noise caused by the cup in the driving of the car and avoid scratching the cup groove. Stop the bottom of cup holders getting messy. Perfect gift the coasters are suitable for both daily life and outdoor self-driving tour, great for birthdays and New Years.| Brand | Moolily #ad |
| Manufacturer | Moolily #ad |
| Height | 0.4 Inches |
| Length | 2.9 Inches |
| Width | 4.7 Inches |
| Part Number | 35743672 |
More information #ad
9. Autrends
#adVans, RVs, ACH001, Trucks, Autrends Car Auto Cup Can Holder Drink Holder Window Door Holder Interior Accessories for Cars, Boats Vehicles 2 Pack
#adMore information #ad
Auto cup holders: mounts easily on all window types. Hook cup holder: not fit if diameter of the containers exceeds 3 inches. Strong plastic holds up to 12 oz. Part number: ACH001. 2 pack cup holder: includes two cup holders for the car; Can be placed in passenger seat or back seat window door panels for water cup or drink bottle.| Brand | Autrends #ad |
| Manufacturer | Autrends #ad |
| Part Number | ACH001 |
| Model | ACH001 |
| Warranty | 180 days |
More information #ad
10. 2CUPS
#adCar Truck Automotive Organizer Table, Compatible with Yeti / Hydro Flasks / Nalgene 16oz 32oz 40oz, 2CUPS Dual Cup Holder Expander and Attachable OvalTray, Adjustable Swivel Tray
#adThe original cup holder expander with attachable tray. Tray for extra storage: tray attaches to upper cup holder providing a convenient place for your favorite snacks, keys, phone and other loose items; no more searching and reaching while driving; spin the tray to fit on your position.
More information #ad
Design patented: our 2cups car cup holder and tray was awarded a design patent for its innovative design Patent # US D925, 300 S. Two cup holders in one: lower cup holder for jumbo extra-wide tumblers / cups 3. 5 - 4 inches wide, hydro flasks, klean kanteens, such as 30 oz yeti ramblers and jumbo water bottles; rubber base pad keeps bottles stable; attached UPPER CUP HOLDER for 12 oz – 32 oz tumblers / bottles / bottles / cups up to 3 inches wide fits most Yeti Ramblers, contigo tumblers, and Nalgenes. Fit: some cars' cup holders are at an angle, in recessed basins or concealed in compartments; please make sure to measure your vehicles' cup holder to ensure fit.
| Brand | 2CUPS #ad |
| Manufacturer | 2CUPS #ad |
| Part Number | TCU-002 |
More information #ad
