As an Amazon Associate I earn from qualifying purchases.





Installation should depend on the inside diameter and outside size. Sizelength may vary: approx. Small diameter2" id Fits over 2" OD Pipe. Installationprofessional installation is highly recommended. Large diameter2. 5" id fits over 2 1/2" OD Pipe.




1. BLACKHORSE-RACING
#ad
BLACKHORSE-RACING 409 Stainless Steel Exhaust Y Pipe 2" ID Single x 2" ID Dual Pipe Exhaust Adapter Connector Universal
#adBLACKHORSE-RACING #ad - Single inside diameter: 2 1/32" 2. 03125", single outside diameter: 2 3/16" 2. 1875", dual inside diameter: 2 1/32" 2. 03125", dual outside diameter: 2 3/16" 2. 1875". Fitment for: universalInstallation should depend on the inside diameter and outside size.More information #ad
Between dual pipes: 1 13/16" 1. 8125", outside to outside of Dual Pipes: 6 3/16" 6. 1875". 10", overall width: 7 3/8" 7. 375", thickness: 2 3/4" 2. 75". Center to center of Dual Pipes: 4". Overall length: approx.Brand | BLACKHORSE-RACING #ad |
Manufacturer | blackhorseracing #ad |
Part Number | HM1350 |
More information #ad
2. TOTALFLOW
#ad
TOTALFLOW TF-SY2020 409 Stainless Steel 2 Inch Y-Pipe-2" Single / 2" Dual Inner Diameter
#adTOTALFLOW #ad - Designed to channel out the emitted gas from the engine of the vehicle. Pipe have a gentler radius that allows for efficient exhaust gas scavenging, noise Cancellation and better balance between cylinder banks. The h-pipe is recommended for those seeking that Classic deep American muscle sound on their vehicle.More information #ad
Stamped y-pipe - 2" inlet diameter, 2" outlet diameter. Weld-on/ clamp-on y-pipes create power gain in low-end and mid-range torque. Check product details below for other sizes. 409 stainless steel Construction for durability and corrosion resistance.Brand | TOTALFLOW #ad |
Manufacturer | TOTALFLOW #ad |
Height | 8.07 Inches |
Length | 3.85 Inches |
Weight | 2.29 Pounds |
Width | 10.82 Inches |
Part Number | TF-SY2020 |
Model | TF-SY2020 |
Warranty | check with the manufacturer |
More information #ad
3. TOTALFLOW
#ad
TOTALFLOW 20-409-201-15 Universal Straight Exhaust Pipe Extension, Tube Replacement 409SS Straight Tube 2 Inch Outer Diameter, 20" long Exhaust Pipe
#adTOTALFLOW #ad - Some adaptation required. Manufactured from 16 gauge 409 Stainless Steel for durability. Check chart below for more information. Overall length: 20".More information #ad
Universal exhaust pipe - not a direct fit. Fit type: Universal Fit. Outlet diameter: 2". Inlet diameter: 2". Check product details below for other sizes. Designed to perform and fit like original equipment.Brand | TOTALFLOW #ad |
Manufacturer | TOTALFLOW #ad |
Height | 2.7 Inches |
Length | 2.7 Inches |
Weight | 2.05 Pounds |
Width | 20.5 Inches |
Part Number | 20-409-201-15 |
Model | TF-P220 |
Warranty | One (1) Year Limited Warranty for parts purchased from authorized dealers ONLY, for list of authorized dealers please check the manufacture website: TOTALFLOW warrants the products mentioned above against defects in materials and workmanship for the period set forth below, when they are owned by the original purchaser and remain installed on the vehicle on which they were originally installed. This warranty is void if the product was not installed properly on the vehicle, was installed on a vehicle for which it was not designed, or was removed from the vehicle on which it was originally installed and reinstalled on another vehicle. This warranty shall not apply to normal wear, including interior/exterior sound levels, cosmetic issues such as coatings and material discoloration, any product that was installed on a racing vehicle, installed improperly or contrary to TOTALFLOW instructions, altered, misused, repaired, damaged from an accident, collision, undercarriage road impact or debris, or willful or neglige |
More information #ad
4. TOTALFLOW
#ad
48" long Exhaust Pipe, Tube Replacement 409SS Straight Tube 2 Inch Outer Diameter, TOTALFLOW 48-409-201-15 Universal Straight Exhaust Pipe Extension
#adTOTALFLOW #ad - Overall length: 48";? manufactured from 16 gauge 409 stainless Steel For Durability;? Designed To Perform And Fit Like Original Equipment;? Universal Exhaust Pipe - Not A Direct Fit.More information #ad
Special features: ? inlet diameter : 2". Some Adaptation Required. Check chart Below For More Information. Outlet diameter: 2". Fit type: Universal Fit.Brand | TOTALFLOW #ad |
Manufacturer | TOTALFLOW #ad |
Height | 3 Inches |
Length | 3 Inches |
Width | 48.5 Inches |
Part Number | 48-409-201-15 |
Model | TF-P224 |
Warranty | One (1) Year Limited Warranty for parts purchased from authorized dealers ONLY, for list of authorized dealers please check the manufacture website: TOTALFLOW warrants the products mentioned above against defects in materials and workmanship for the period set forth below, when they are owned by the original purchaser and remain installed on the vehicle on which they were originally installed. This warranty is void if the product was not installed properly on the vehicle, was installed on a vehicle for which it was not designed, or was removed from the vehicle on which it was originally installed and reinstalled on another vehicle. This warranty shall not apply to normal wear, including interior/exterior sound levels, cosmetic issues such as coatings and material discoloration, any product that was installed on a racing vehicle, installed improperly or contrary to TOTALFLOW instructions, altered, misused, repaired, damaged from an accident, collision, undercarriage road impact or debris, or willful or neglige |
More information #ad
5. BETTERCLOUD
#ad
2" 51mm 304 Stainless Steel DIY Custom Mandrel Exhaust Pipe Straight & Bend Kit
#adBETTERCLOUD #ad - 2" outside diameter od; Made of 304 Stainless Steel. Each pipe is expanded on one end to allow easy installation. These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it.More information #ad
Straight pipes length: 47. 25" or 120cm; average leg Length = 5 1/2". Raw metal finish, true mandrel bent elbows and bends.Brand | BETTERCLOUD #ad |
Manufacturer | BETTERCLOUD #ad |
Part Number | ST40703 |
More information #ad
6. A ABIGAIL
#ad
Universal 2" ID to 2.5" ID Exhaust Pipe Adapter Connector Reducer 304 Stainless Steel 2 Inch to 2.5 Inch 2” ID to 2 1/2” ID kit
#adA ABIGAIL #ad - High qualitythis 2 inch to 2. 5 inch2” id to 2 1/2” id exhaust pipe adapter made of 304 stainless steel and has a polished finish. Please check the detailed size before purchasing it.Installation should depend on the inside diameter and outside size. Sizelength may vary: approx. Small diameter2" id Fits over 2" OD Pipe. Installationprofessional installation is highly recommended. Large diameter2. 5" id fits over 2 1/2" OD Pipe.
More information #ad
Service100% satisfaction guarantee, If you have any issues with the part, simply contact customer service for troubleshooting help, parts, replacement, or refund. If opposing od/id’s are used, fitment is not guaranteed. 1/16". Our aim is to make you satisfy the parts and the service we provide for you. Applicationsuniversal fit for all exhaust/turbo/intercooler/intake piping connection. 3 13/16", metal thickness may Vary: Approx.Brand | A ABIGAIL #ad |
Manufacturer | A ABIGAIL #ad |
Part Number | A87062OL |
More information #ad
7. BETTERCLOUD
#ad
Universal 2" ID to 2.5" ID Exhaust Pipe Adapter Connector Reducer Mild Steel
#adBETTERCLOUD #ad - Material: High quality mild steel. 3 13/16". 1/16". Metal thickness may Vary: Approx. Large diameter: 2. 5" id fits over 2 1/2" OD Pipe. Length may vary: approx. Small diameter: 2" id Fits over 2" OD Pipe.More information #ad
Brand | BETTERCLOUD #ad |
Manufacturer | BETTERCLOUD #ad |
Height | 2.76 Inches |
Length | 3.94 Inches |
Weight | 0.44 Pounds |
Width | 2.76 Inches |
Part Number | EJ45808 |
Model | Universal |
More information #ad
8. BLACKHORSE-RACING
#ad
BLACKHORSE-RACING 1.5" 1 1/2” ID to 2” ID Universal Exhaust Pipe to Pipe Adapter Reducer Connector
#adBLACKHORSE-RACING #ad - Large diameter: 2" id fits over 2” OD Pipe. Not: if opposing od/id’s are used, fitment is not guaranteed. Product is man-made and no two items will be exactly identical, although, edges may not be smooth; therefore, every effort is made to ensure a consistent and quality product.More information #ad
3 7/8”, metal thickness May Vary: Approx. Length may vary: approx. 1/16”. Small diameter: 1. 5" id fits over 1 1/2” OD Pipe. Material: stainless Steel T201.Brand | BLACKHORSE-RACING #ad |
Manufacturer | blackhorseracing #ad |
Weight | 0.37 Pounds |
Part Number | HM1823 |
More information #ad
9. YOLANDO
#ad
JY Performance 2'' Custom Exhaust Kit Tubing Mandrel Bend Pipe Straight & U-Bend Universal 2 Inch 16PCS
#adYOLANDO #ad - We are direct manufacturer, so we got the lowest price and best quality. Each 2" smooth mandrel bent tube is Expanded On One End To Allow Easy Slip-fit Installation. 16-gauge piping walls Of This Custom Exhaust Kit.More information #ad
This universal custom exhaust kit made of high Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, 16-Gauge Piping Walls. 4 x 40" straight pipes, 4 x 45 degree pipes, 4 x 90 degree pipes, 4 X 180 Degree U-Bends, Detail Dimensions Please See Pictures.Brand | YOLANDO #ad |
Manufacturer | JY Performance #ad |
Part Number | DAC |
More information #ad
10. Squirrelly Performance Parts
#ad
Squirrelly 2" Inch Stainless Steel Mandrel Bend Angles Turbo Fabrication Shops and Racers Alike Straight Pipe Tubing 16 Gauge Exhaust Feet System
#adSquirrelly Performance Parts #ad - 3 feet Length. 2" diameter. 16 gauge. 304 stainless Steel. Raw finish. Made in the usa! Made in the usa! .More information #ad
Brand | Squirrelly Performance Parts #ad |
Manufacturer | Squirrelly Performance Parts #ad |
Height | 4 Inches |
Length | 36 Inches |
Weight | 5 Pounds |
Width | 4 Inches |
Part Number | SPP 8225-3 |
More information #ad