Top 10 Suspension Parts for – Automotive Replacement Complete Shock Assemblies

As an Amazon Associate I earn from qualifying purchases.

1. Andersen Restorations

#ad

Andersen Restorations Front End Suspension Rebuild Kit Compatible with Chevrolet 2WD C10 1/2 Ton Pickup/Blazer OEM Spec Replacements 18 Piece Kit

#ad
Andersen Restorations #ad - Also contains: the cotter pins, zirc fittings when applicable, Nuts, Rubber Grease Seals/boots, Plus The Tie Rod Sleeve Bolts, And The Bolts For The Ball Joints, And Clamps. High-quality: OEM Spec Replacements. Years: 1973-1990 Models: compatible with chevrolet 2WD C10 1/2 Ton Pickup Blazer. Included in the 18 piece kit: inner tie rods 2 each, lower control arm bushings 4 Each, Outer Tie Rods 2 Each, tie rod sleeves 2 Each, Upper Control Arm Bushings 4 Each, upper ball joints 2 each, Lower Ball Joints 2 Each.
BrandAndersen Restorations #ad
ManufacturerAndersen Restorations #ad
Height6 Inches
Length12 Inches
Width8 Inches
Part Number350

2. PartsW

#ad

14 Pc Complete Suspension Kit Upper Control Arm + Lower Control Arm Forward Position Tie Rod Ends Sway Bars Bellow Boots

#ad
PartsW #ad - Restores proper vehicle balance and Promotes longer shock life. Oem design direct fit / control arms come Pre-Assembled With Ball Joints & Bushings / Replacement improves handling. Components and hardware have been specially treated to increase strength resistance, precision-machined to stringent tolerances. Compatible with infiniti G35 & Nissan 350Z. Before placing the order, please check your car model in the Amazon Fitment Filter System in the top left corner.
BrandPartsW #ad
ManufacturerPartsW #ad
Part NumberPW3849
Warranty

Warranty, Parts: Purchase with confidence knowing that our parts are covered by a manufacturer's 12 month, unlimited mileage part warranty, to be free from defects in material and workmanship. The warranty begins from the date purchased. This warranty is offered only to the original purchaser of the item and is not transferrable. This warranty applies only when the installation instructions are followed in their entirety. Installation should be performed by a licensed mechanic. This warranty covers repairing or replacing the warranty item only. This warranty does not cover any expenses incurred in the removal and / or reinstallation of the item. Specifically, this warranty does not cover any expenses for time, rental, other parts, or any labor. This warranty does not apply, and will be voided, if the warranty item has been damaged by abuse, misuse, accident, neglect, improper installation, or alteration.


3. ZENITHIKE

#ad

ZENITHIKE 15PCS Front Suspension Kit for Chevy Silverado 1500/Tahoe For Cadillac for Gmc Upper Control Arms Inner And Outer Tie Rods Sway Bar Links Upper Lower Ball Joints Idler And Pitman Arm

#ad
ZENITHIKE #ad - Check carefully - it is very important to check the comparability notes for an exact fit. Main function - contributing to the vehicle's handling and braking, and providing safety and comfort by keeping the vehicle's passengers comfortably isolated from road noise, bumps and vibrations.

Product advantages - fast shipment within USA, with lower cost and complete functions, Ideal replacement for OE parts, Designed with quality materials for exceptional performance. You can always contact us to make sure it is the exact fitment. Compatible vehicles - 1999-2006 for chevrolet silverado 1500;2007 for chevrolet silverado 1500 classic;2000-2006 for chevrolet tahoe;2002-2006 for chevrolet avalanche 1500;2000-2006 for chevrolet Suburban 1500;1999-2006 for Gmc Sierra 1500;2007 for Gmc Sierra 1500 Classic;2000-2006 for Gmc Yukon;2001-2006 for Gmc Yukon XL 1500;2002-2006 For Cadillac Escalade;.

Kit includes - 2 x es3488 front inner tie rod end, 1 x k6723 idler arm bracket assembly and grease, 2 x k80631 front sway bar end link, 1 x k6534 front steering idler arm - heavy Duty, 2 x es3493t front outer tie rod end, 2 x K80942 Front Upper Control Arm And Ball Joint with S-tandard Bushings, 2 x K6541 Front Lower Ball Joint, 2 x k6540 front upper ball joint, 1 x K6536 Pitman Arm - with 4 Grooves - Heavy Duty.
BrandZENITHIKE #ad
ManufacturerZENITHIKE #ad
Height3.15 Inches
Length15.78 Inches
Width16.93 Inches
Part Number813096-5262-1604410011
ModelAdjustable

4. AM Autoparts

#ad

Front Suspension Lower Control Arm with Ball Joint LH RH Pair Set 2pc for Sonic

#ad
AM Autoparts #ad - Reference numbers: cms501196, 95918881, 95281652, 512-01484l, 95918880, 95190869, cms501197, 95281651, k622428, 522-065, 512-01483r, 522-066, K622426. Quantity: 2 Piece.
BrandAM Autoparts #ad
ManufacturerAM Autoparts #ad
Part NumberAM-3273296187

5. Genuine Toyota Parts

#ad

Genuine Toyota Parts, Suspension Fluid 08886-01805

#ad
Genuine Toyota Parts #ad - Oem, not after Market. Vehicle Specific. Manufacturer Warranty. Toyota Quality Assured. And vehicle Specific.
BrandGenuine Toyota Parts #ad
ManufacturerToyota #ad
Height8 Inches
Length10 Inches
Width8 Inches
Part Number08886-01805
Model08886-01805
WarrantyManufacturer Warranty

6. Parts Warehouse

#ad

Rack & Pinion Bellows, 10 Pc Front Suspension Kit Inner & Outer Tie Rod Ends, Upper & Lower Ball Joints

#ad
Parts Warehouse #ad - Oem design direct fit / eliminates rattling and clunking noises associated with a failed tie rod / Precision-made performance and additional strength.

Restores proper vehicle balance and Promotes longer shock life. Before placing the order, please check your car model in the Amazon Fitment Filter System in the top left corner. Compatible with toyota tacoma 1995-1997 4wd/toyota tacoma 1998-2000 4wd models / RWD Pre Runner w/ Power Steering Only/Toyota Tacoma 2001-2004 4WD. Components and hardware have been specially treated to increase strength resistance, precision-machined to stringent tolerances.
BrandParts Warehouse #ad
ManufacturerPartsW #ad
Part NumberPW1482
WarrantyWarranty, Parts: Purchase with confidence knowing that our parts are covered by a manufacturer's 12 month, unlimited mileage part warranty, to be free from defects in material and workmanship. The warranty begins from the date purchased. This warranty is offered only to the original purchaser of the item and is not transferrable. This warranty applies only when the installation instructions are followed in their entirety. Installation should be performed by a licensed mechanic. This warranty covers repairing or replacing the warranty item only. This warranty does not cover any expenses incurred in the removal and / or reinstallation of the item. Specifically, this warranty does not cover any expenses for time, rental, other parts, or any labor. This warranty does not apply, and will be voided, if the warranty item has been damaged by abuse, misuse, accident, neglect, improper installation, or alteration.

7. Parts Warehouse

#ad

11 Pc Inner & Outer Tie Rod Ends Adjusting Sleeves Pitman Arm Upper & Lower Ball Joints Suspension Kit Compatible with Single Rear Wheels Models

#ad
Parts Warehouse #ad - Components and hardware have been specially treated to increase strength resistance, precision-machined to stringent tolerances. Restores proper vehicle balance and Promotes longer shock life.

Compatible with ford e-250 2003-2004 / ford e450 econoline super duty 2000-2002 / ford e450 super duty 2003-2004 / ford e-350 club wagon 2003-2004 / ford e-350 econoline 1997-1998 / Ford E-350 Super Duty 1999-2004 / Ford E-250 Econoline 1997-2002 / ford e-350 econoline club wagon 1997-2002 / Ford Econoline Super Duty 1999. Before placing the order, please check your car model in the Amazon Fitment Filter System in the top left corner. Oem design direct fit / undergo impact, wear, and fatigue testing to help ensure quality and durability.
BrandParts Warehouse #ad
ManufacturerPartsW #ad
Part NumberPW2086
WarrantyWarranty, Parts: Purchase with confidence knowing that our parts are covered by a manufacturer's 12 month, unlimited mileage part warranty, to be free from defects in material and workmanship. The warranty begins from the date purchased. This warranty is offered only to the original purchaser of the item and is not transferrable. This warranty applies only when the installation instructions are followed in their entirety. Installation should be performed by a licensed mechanic. This warranty covers repairing or replacing the warranty item only. This warranty does not cover any expenses incurred in the removal and / or reinstallation of the item. Specifically, this warranty does not cover any expenses for time, rental, other parts, or any labor. This warranty does not apply, and will be voided, if the warranty item has been damaged by abuse, misuse, accident, neglect, improper installation, or alteration.

8. SCITOO

#ad

SCITOO 4PC Front Upper Lower Ball Joints Suspension Parts Kit fit 2000 2001 2002 for Toyota Sequoia and Tundra 2WD 4x4

#ad
SCITOO #ad - High quality brand - scitoo auto parts select premium quality material and rigorous professional testing to help ensure quality and durability & provide 1 year warranty. We provide suspension kits for most CARS, SUVS, TRUCKS, TRAILERS. Please make sure your vehicle matches this kit before buying. Suspension kit buyer's guide - a suspension kit is basically a collection of parts that are used to restore, idler arm, replace, tie rod ends, or modify a vehicle's suspension system.

This suspension auto parts directly replaces the original assembly on specific vehicle applications, sway bar links, pitman arm, easy installation and steering alignment. A complete suspension kit typically includes the following parts: control arms, and ball joints. Select your vehicle year/make/model/Trim in the top left corner of the page to confirm compatibility, or see more compatible vehicles in the description. Chassis products fit - 1996 1997 1998 1999 2000 2001 2002 for toyota 4runner, 2001 2002 for Toyota Sequoia, 2000 2001 2002 for Toyota Tundra.

When to replace suspension kit - ①steering noise such as snapping, popping, creaking or groaning sounds when turning. Feeling every bump:Suspension noise such as clunking, rattling or popping on rough roads. Difficulty when steering: ”memory steer” or poor steering return where the car doesn’t want to go straight after ­turning due to binding in the upper mount. Included components - 1x k90262 front lower ball joint - driver side, 1x K90263 Front Lower Ball Joint - Passenger Side, 2x K90255 Front Upper Ball Joint.
BrandSCITOO #ad
ManufacturerScitoo #ad
Height3.94 Inches
Length43.99 Inches
Weight13.14 Pounds
Width6.1 Inches
Part Number801924-5206-1510061
Model801924-5206-1510061

9. SCITOO

#ad

SCITOO 11pcs Suspension Kit 4 Outer Tie Rod End 2 Lower 2 Upper Ball Joint 2 Sway Bar 1 Front Track Bar 1 Outer Connecting Tie Rod End fit for 1997-2006 for Jeep TJ Wrangler Es3094L

#ad
SCITOO #ad - Select your vehicle year/make/model/trim in the top left corner of the page to confirm compatibility, SUVS, or see more compatible vehicles in the description. When to replace suspension kit - ①steering noise such as snapping, popping, creaking or groaning sounds when turning. Feeling every bump:Suspension noise such as clunking, rattling or popping on rough roads.

Difficulty when steering: ”memory steer” or poor steering return where the car doesn’t want to go straight after ­turning due to binding in the upper mount. Chassis products fit - 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 for jeep tj, 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 for Jeep Wrangler. Suspension kit buyer's guide - a suspension kit is basically a collection of parts that are used to restore, or modify a vehicle's suspension system. This suspension auto parts directly replaces the original assembly on specific vehicle applications, sway bar links, easy installation and steering alignment.

A complete suspension kit typically includes the following parts: control arms, replace, idler arm, tie rod ends, pitman arm, and ball joints. Included components - 1x es3096l front inner steering tie rod end, 2x k3134t front upper ball joint, 2x k3197 front sway bar end link, 1x es3095r front outer tie rod end at passenger side connecting Tie Rod - 4.0l, 2x k3137t front lower ball joint, 1x ds1235 front track bar, 1x ES3094L Front Outer Tie Rod End - Driver Side - 4.0l, 1x ds1430 outer connecting Tie Rod End - Passenger Side.
BrandSCITOO #ad
ManufacturerSCITOO #ad
Height2.95 Inches
Length64.92 Inches
Width4.72 Inches
Part Number809895-5206-1343490281
Model809895-5206-1343490281

10. Detroit Axle

#ad

Detroit Axle, 8-Lug Front Upper Control Arms w/Ball Joints Suspension Kit Replacement for Sierra Silverado 2500 3500 HD Hummer H2

#ad
Detroit Axle #ad - Detroit axle suspension components are ready to meet the rigorous demands of today's foreign and domestic passenger cars, trucks, and SUVs. Kit includes: 2x front upper control arm w/ball joints, 2x front lower Ball Joints, 4x tie rod ends, 1x steering Pitman Arm, 2x Front Sway Bar End Links, 1x Front Idler Arm and 1x Front Idler Bracket Pivot.10-year Warranty. For 8 lug models with 3-Groove Pitman Arm. Fits: specific models - check Fitment Chart and Product Description for Accurate Information.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Height16 Inches
Length24 Inches
Weight26 Pounds
Width6 Inches
Part Number80090-13