Top 10 Scissor Jack Adapter for 1/2 Inch Impact Wrench – Vehicle Lifts, Hoists & Jacks

As an Amazon Associate I earn from qualifying purchases.

1. T1A TruBuilt 1 Automotive

#ad

Used for Automotive Jack, T1A Scissor Jack Adapter for 1/2 Inch Impact Wrench or 13/16 Inch Lug Wrench Adaptor, RV or Trailer Leveling Jacks. New Improved More Universal Design by T1A USA

#adT1A TruBuilt 1 Automotive #ad - 100% satisfaction Money Back Guarantee. For use with 13/16 lug wrench/tire iron or socket or easily add a half inch adapter to any drill. Fits most brands of scissor jacks.

We are the only scissor jack available now with this universal fit. Newly redesigned** we lengthened the bolt for a more universal fit and we have included spacers/washers to make sure it works for your scissor jack. Don't buy theirs and then return it and buy ours, save time and money, and frustration. For use with 1/2" impact wrenches, drills or standard drive sockets. Easily raise, lower and level your scissor jacks faster and more easily than ever. This is the perfect accessory for those hard to use loop type or double eyelet type scissor jacks. We had customer complaints before that it did not fit their scissor jack which led to our redesign.

Brand	T1A TruBuilt 1 Automotive #ad
Manufacturer	TruBuilt 1 Automotive #ad
Height	1 Inches
Length	2.1 Inches
Weight	0.31 Pounds
Width	1.65 Inches
Part Number	T1A12SJA
Model	97179
Warranty	30 day money back and satisfaction guarantee. 12 month warranty from manufacturer defect.

2. Dr.Roc

#ad

Dr.Roc Scissor Jack Adapter for 1/2 Inch Drive Impact Wrench or 13/16 Inch Lug Wrench or Power Drills, Scissor Jack Drill Adapter for Impact Drills Socket Automotive Jack RV Trailer Leveling Jack

#adDr.Roc #ad - Sturdy: power saving scissor jack Adapter-Made of very solid chrome vanadium steel and new composite steel material. Compatibility: after we adopted standardized production, scissor jack adapter is suitable for most of loop type or double eyelet type scissor jacks in the market.

Dr. Roc-most trusted auto accessories expert, millions buyers' choice, excellent customer service. Easy to use with the following tools: ▶1/2" drive/impact drills/ratchet or standard drive sockets; ▶13/16" lug wrench/tire iron or socket or easily add a half inch adapter to any drill; ▶ If you don't have a 1/2 inch hex or impact wrench, you can very easily get a standard drill bit to 1/2" adapter and use any cordless or corded drill with this tool and those difficult scissor jacks.

If you are worry about compatibility, please check the oval's size on your jacks. Product dimensions: 507*41. 4*24 mm 2. 0 x 1. 63 x 095 inches; Slot Size: 8. 8 mm035 inch wide; 23.

Brand	Dr.Roc #ad
Manufacturer	Dr.Roc #ad
Height	1.63 Inches
Length	2.1 Inches
Width	1 Inches
Part Number	DR-25097
Model	DR-25097

3. labwork

#ad

Scissor Jack Adaptor 1/2'' for Use with 1/2 Inch Drive or Impact Wrench Tools

#adlabwork #ad - 13/16" lug wrench/tire iron or socket or easily add a half inch adapter to any drill. This adapter fits most of the scissor jacks in the market, including loop typehole diameter>9. 7 mm or double eyelet typehole diameter>9. 7 mm, eyelet distance

Brand	labwork #ad
Manufacturer	labwork #ad
Part Number	Does Not Apply

4. Quick Products

#ad

Quick Products QP-SJA 1/2" Scissor Jack Adapter

#adQuick Products #ad - May remain permanently attached to the jack for the quickest setup. Increases the speed and ease that your jack will raise and lower. Works with both “U" shaped and single-eye ends. Versatile: fits onto 1/2" drives or into 13/16" sockets. Will not work with hex-style cranks.

Brand	Quick Products #ad
Manufacturer	Quick Products #ad
Weight	0.3 Pounds
Part Number	QP-SJA
Model	QP-SJA

5. ORIGINSUN

#ad

Used for Automotive Jack, RV, and Trailer Leveling Jacks IJA001, ORIGINSUN Scissor Jack Drill Adapter for 1/2 Inch Drive Impact Wrench and 13/16 Inch Lug Wrench or Power Drills

#adORIGINSUN #ad - Please check the dimensions before ordering. Material: made of very solid chrome vanadium steel 50BV30 Steel. Enough to fit most of scissor jacks, you can check the oval's size on your jacks to ensure this.

Dimension: 507*41. 4*24 mm 2. 0 x 1. 63 x 095 inches; slot size: 8. 8 mm035 inch wide; 23. 90 mm 094 inch deep; bolt length: 4. 1 cm1. 6 inches; Bolt Dimensions: 9. 7 mm038 inch. Suitable: 1/2" drive/impact drills/ratchet or standard drive sockets, 13/16" lug wrench/tire iron or socket or easily add a half inch adapter to any drill. Function: this adapter makes it easy to use your scissor jack, when it is used with wrenches, especially with power drill or impact wrench.

Brand	ORIGINSUN #ad
Manufacturer	ORIGINSUN #ad
Part Number	2062101

6. ABN

#ad

And Level Your Vehicle, ABN Scissor Jack Adapter, 1.5in Square Drive Drill Scissor Jack Connector to Raise, Lower

#adABN #ad - Pro safety tips: store a scissor jack and drill car jack adapter in your trunk in case of emergencies; Always ensure you are on a flat surface when lifting your vehicle; Do not lay under your vehicle while the car is lifted.

Use existing tools: fits “u” shaped and “o” shaped scissor jacks; Adapter scissor jack tool is compatible with 1/2" drive/impact drills/ratchet or standard drive sockets, 13/16" lug wrench/tire iron or socket. Swap tires faster: quickly remove flat tires with ABN Scissor Jack Drill Adapter; With minimal force, lower, you can raise, and level your scissor jacks without the need of a crank handle tool. Quality you can trust: heavy-duty chrome vanadium steel coating resists elements so you can change tires in any weather; Compact car jack adapter socket measures 2 x 1.

6 x 08 inches 5 x 4 x 2cm. How to use: slide drill jack adapter onto the scissor jack and stick the bolt and washer through the predrilled holes of the adaptor and jack; Insert the crush washer, bolt washer, and nut on the opposite side and tighten the bolts securing the impact jack adapter to the scissor jack.

Brand	ABN #ad
Manufacturer	ABN #ad
Height	1.2 Inches
Length	5.8 Inches
Weight	0.31 Pounds
Width	3.5 Inches
Part Number	812621

7. Neiko

#ad

Chrome Vanadium Steel | 5-Piece Set for Impact Driver Conversions, Neiko 30249A Impact Socket Adapter and Reducer Set

#adNeiko #ad - Heavy duty: made of drop forged, Heat Treated Chrome Vanadium Steel for Superior Strength. Durable: black Oxide Finish for Maximum Longevity. Universal: 5 piece set includes 2 reducers: 3/8" female x 1/4" male, 3/8" f x 1/2" m, 1/2 inch f x 3/8" M and 3 Adaptors: 1/4" F x 3/8" M, 1/2" F x 3/4" M. Impact grade: designed Specifically for Impact Drivers & Wrenches. Secure: spring loaded detent balls keep Your Sockets Secure and Through Holes Allow the Use of Locking Pins & Rings.

Brand	Neiko #ad
Manufacturer	Neiko #ad
Height	1 Inches
Length	2 Inches
Weight	0.62 Pounds
Width	3.5 Inches
Part Number	3792988
Model	30249A

8. LEXIVON

#ad

LEXIVON Impact Grade Socket Adapter Set, 3/8", and 1/2" Drive, 3" Extension Bit With Holder | 3-Piece 1/4", Adapt Your Power Drill To High Torque Impact Wrench LX-101

#adLEXIVON #ad - One set of impact socket adapters, unlimited uses – the ¼” hex shank will fit all quick Change systems and standard drill chucks, which is ideal for both professionals and DIYers. Perfect for the toughest jobs – the black phosphate coating Treatment will make sure that your rust-proof and corrosion-resistant drill to socket adapter will endure any abuse.

For a lifetime of successful projects – meet & exceeds ansi the american national Standard Institute and backed by our Lifetime Limited Warranty for your complete peace of mind. Save your time & effort – the chamfered edges and spring-loaded detent ball will ensure a tight and secure fit, thus allowing you to save your precious time and perform auto repair tasks easily.

Must-have heavy duty tools for your toolbox – our 3 x impact grade adapters are made from heat treated Chrome Vanadium steel and come in a convenient organizer/holder.

Brand	LEXIVON #ad
Manufacturer	LEXIVON #ad
Height	0.5 Inches
Length	3 Inches
Width	0.5 Inches
Part Number	LX-101
Model	LX-101

9. Camco

#ad

Works with All 3/4" Hex Drive Jacks 57363, Fits 3/8" and 1/2" Power Drills, Camco RV Leveling Scissor Jack Socket Drill Adapter

#adCamco #ad - Reduces time and effort to raise or lower Scissor jacks. Works with all 3/4 inch hex drive jacks. Fits 3/8 inch or 1/2 inch power drills.

Brand	Camco #ad
Manufacturer	Camco #ad
Height	6 Inches
Length	1.3 Inches
Weight	0.15 Pounds
Width	2.4 Inches
Part Number	57363
Model	57363
Warranty	LIMITED WARRANTY

10. LEXIVON

#ad

3/8", Chrome Molybdenum alloy steel LX-112, LEXIVON Impact Socket Adapter and Reducer 4-Piece Set | 1/4", 1/2" Impact Driver Conversions

#adLEXIVON #ad - Get a bigger bang for your buck: while other socket reducers are vulnerable to rust and corrosion, our adapters are treated with a rust-proof Manganese Phosphate coating. Unlike all those flimsy socket adapters our robust impact adapters and reducers are made from heat-treated Chrome Molybdenum alloy steel for enhanced durability.

One adapter/reducer set for all your needs: our 4-piece impact-grade adapter and reducer kit includes 1/4"F to 3/8"M - 3/8"F to 1/4"M - 3/8"F to 1/2"M - 1/2"F to 3/8"M. Reduce fatigue & discomfort: the smart spring-loaded detent ball system will prevent dropping while the through-hole in the drive end will securely lock the adapter onto the drive tang. 100% problem-solving, 100% risk-free – meet & exceeds ansi the american national Standard Institute and backed by our Lifetime Limited Warranty for your complete peace of mind.

Brand	LEXIVON #ad
Manufacturer	LEXIVON #ad
Height	5.6 Inches
Length	1.1 Inches
Width	3.1 Inches
Part Number	LX-112
Model	LX-112