Top 10 Push Bar for – Automotive Light Bars

As an Amazon Associate I earn from qualifying purchases.

1. Westin

#ad

Westin 30-0005 Light Bar, Black

#ad
Westin #ad - Made from heavy-duty 2 diameter steel tubing. Adds the finishing touch to personalize vehicle. Requires installation kit. Welded tab allows for east auxiliary light mounting. Helps to protect vehicle's front end with a rugged appearance.
BrandWestin #ad
ManufacturerWestin #ad
Height9 Inches
Length36 Inches
Weight1.25 Pounds
Width23 Inches
Part Number30-0005
Model30-0005
Warranty5-Year Warranty

2. GOOACC

#ad

GOOACC 150 pcs Push-Type Bumper Fasteners Rivet Clips-2 Sizes Universal Auto Clips & Fastener for Bumper Fender Clips Replacement-Fastener Removal Tool Included 150PCS Clip

#ad
GOOACC #ad - Sizes: one is measured head dia: 20mm; stem length: 22. 8mm; fits Into: 8mm hole. The other :head dia: 20mm; Stem length: 16 mm; fits: 10mm hole. Application: widely used for door trim, bumper, fender, radiator shield yoke, side skirt, grille, engine cover and splash shield retainers.

Better than other clips. Impact resistant push rivets - well made of durable nylon plastic, it is super sturdy! Tough fastener remover- durable plastic and metal material that has advantage of high abrasion resistance, not easy to break or crack like other brands, allow you to quickly and easily remove car door panel and upholstery clips without causing damage to them. Package included: 100 pcs universal 8 mm push-type plastic clips, 50 pcs 10mm Nylon Bumper Fender Flare Fastener, 1 pcs 5-inch Fastener Remover.
BrandGOOACC #ad
ManufacturerGOOACC #ad
Part NumberGRC-31
ModelGRC-31
Warranty2 Years Warranty

3. Nilight

#ad

90021B Led Light Bar Mounting Bracket Front License Plate Frame Bracket License Plate Mounting Bracket Holder for Off-Road Lights LED Work Lamps Lighting Bars, 2 Years Warranty, Nilight

#ad
Nilight #ad - Easy installation: no drill, just like replace a license plate using its mount location, no modification required, usually can be installed in 20 minutes. Work with most off road auxiliary lights, Pickup, driving lights, LED work Lamp and LED light bars.

On the bull bar, 2 sets of mounting holes on top and 1 set in front. Mounting position: 4 different locations/methods to install the off-road lights. Universal fitment: fits for almost all car, SUV, truck, fog lights, 4x4, Jeep, etc. In some cases, you may be able to drill additional holes on the bracket to securely mount the bracket. Package include: 1Pc front license plate mounting bracket. Note: there is a possibility that the bracket holder may block some vehicles' parking sensor. Heavy-duty bracket: high-quality aluminum alloy material and Advanced production process, the mounting bracket is impact resistant and anti-corrosion.
BrandNilight #ad
ManufacturerNilight #ad
Height4 Inches
Length20 Inches
Weight1 Pounds
Width3 Inches
Part Number90021B
Model90021B
Warranty2 Years Warranty

4. Go Rhino!

#ad

Go Rhino! 3160B Black 3000 Series StepGuard Grille Guard

#ad
Go Rhino! #ad - Includes a patented built-in step. Equipped with a step pad. Easy installation. Features a black powder coating which provide long lasting durability. Designed to provide excellent protection against impacts.
BrandGo Rhino! #ad
ManufacturerGo Rhino #ad
Height0 Inches
Length0 Inches
Weight55 Pounds
Width0 Inches
Part Number3160B
Model3160B
Warranty5 Year

5. Steelcraft

#ad

Steelcraft 52220P Bumper, Rear

#ad
Steelcraft #ad - Package weight : 26. 535 kg. Country of Origin : China. Package dimensions: 27. 94 l x 67. 818 w x 91. 948 h cm. Product type : vehicLE BUMPER.
BrandSteelcraft #ad
ManufacturerSteelcraft Automotive #ad
Height26 Inches
Length37 Inches
Weight39.36 Pounds
Width11 Inches
Part Number52220P
Model52220P
Warranty3 Years

6. KYX

#ad

2002-2006 Avalanche 1500, KYX Bull Bar for 1999-2006 Chevy Silverado 1500/GMC Sierra 1500, 3" Brush Push Grille Guard Front Bumper, for 2000-2006 Tahoe/Suburban/Yukon/Yukon XL1500

#ad
KYX #ad - All mounting hardware and instructions included. Pre-drilled holes: easily install the off-road lights of your choice for increased illumination when driving at night or off-roading. Perfect fit: this 3” bull bar from kyx features an exclusive patented design, and perfectly fits 1999-2006 gmc sierra 1500/ chevy silverado 1500 and 2007 GMC Sierra 1500 Classic/ 2007 Chevy Silverado 1500 Classic, fits 2000-2006 Chevrolet Tahoe/Suburban/ GMC Yukon/ Yukon XL 1500/ 2002-2006 Chevy Avalanche 1500 High durability: made from high-grade steel with seamless welding and crafted through advanced CNC bending processes, this rust-resistant bull bar with removable skid plate provides additional protection for the front of your vehicle.



24-hr support: the kyx 3” bull bar is guaranteed against all defects and our support team is standing by 24/7 to assist you if you need help. Fast installation: 100% bolt-on design, no drilling needed, can be easily installed at home using common garage tools.
BrandKYX #ad
ManufacturerKYX #ad
Part NumberKY8CEB0100
ModelKYX Bull Bar 99-06 GMC Sierra 1500

7. AUTOSAVER88

#ad

AUTOSAVER88 Bull Bar Compatible for 07-18 Chevy Silverado 1500/ GMC Sierra 1500/19 Chevy Silverado LD /07-20 Chevy Suburban/GMC Yukon 3" Grille Brush Push Guard w/Skid Plate Light Mounting Holes

#ad
AUTOSAVER88 #ad - A special e-coating and black powder coating finish are applied to make it rust-resistant. Perfect fitthis black glossy bull bar compatible for 07-18 chevy silverado 1500/gmc sierra 1500; 07-20 chevy suburban /tahoe/gmc yukon/yukon xl; 2019 Chevy Silverado 1500 LD/GMC Sierra 1500 Limited.

This brush guard not only gives your vehicle a new look, but also adds more protection. Surface finishthe push guard is made up of a 3" heavy duty tubing frame that offers the best in durability and strength. The anti-rust skid plate can be removed. Easy to install100% bolt-on installation, no drilling required. If you receive a product with dents and scratches on the surface, or have any hardware and brackets missing; or have any questions about the installation.

All mounting hardware and installation instructions are included. Please feel free to contact us. Not compatible for 2019-2021 chevy silverado/gmc sierra 1500 New Body Style/2007 Chevy Silverado 1500 Classic. Installation can be done easily in a home garage using common tools. Seamlessly welded with a smooth appearance. Outstanding designfeatures pre-drilled holes to easily add additional lighting.
BrandAUTOSAVER88 #ad
ManufacturerAUTOSAVER88 #ad
Height19.55 Inches
Length41.19 Inches
Width3 Inches
Part NumberATBB5014
ModelBull Bar
WarrantyNo-hassle 1 year warranty against manufacturing defects.

8. Auto Dynasty

#ad

Compatible with Dodge Ram 1500/2500/3500 DR/DH 3 inches Bumper Push Bull Bar+Removable Skid Plate Chrome

#ad
Auto Dynasty #ad - Pre-drilled for auxiliary Light Mounting / Removable Skid Plate. Protects vehicle Front End from Minor Impacts. Made of lightweight polished SUS-304 Stainless Steel for Strength and Durability. Bolt-on design with Complete Mounting Kits for Ease of Installation. 3" enlarged diameter Tubing with Seamless Welding Construction for Extra Reinforcement.
BrandAuto Dynasty #ad
ManufacturerAuto Dynasty #ad
Part NumberAD-BURB-021-SS

9. Auto Dynasty

#ad

Compatible with Chevy C/K-Series C10 GMT400 3 inches Bumper Push Bull Bar+Removable Skid Plate Black

#ad
Auto Dynasty #ad - 3" enlarged diameter Tubing with Seamless Welding Construction for Extra Reinforcement. Bolt-on design with Complete Mounting Kits for Ease of Installation. Pre-drilled for auxiliary Light Mounting / Removable Skid Plate. Protects vehicle Front End from Minor Impacts. Made of lightweight polished SUS-304 Stainless Steel for Strength and Durability.
BrandAuto Dynasty #ad
ManufacturerAuto Dynasty #ad
Part NumberAD-BURB-005-BK

10. iJDMTOY

#ad

LED Work Lamps, iJDMTOY AA3117 Universal Fit Bull Bar Style Black Painted Stainless Steel Front Bumper License Plate Mount Bracket Holder Compatible With Off-Road Lights, LED Lighting Bar

#ad
iJDMTOY #ad - In this case, we recommend drilling holes to mount the bracket onto the vehicle. Unlike many other ones on the market that are made with very flimsy aluminum, which cannot withstand the impact or actually mount the LED lightbar on it.

5mm thick heavy-duty stainless steel with semi-gloss black paint, once you hold it, you can feel the weight. If the existing holes are only on the plastic bumper, you may use the additional holes on the side of the bracket plane to secure the bull bar. Fit type: pod cube lightbar iron Worklight Relocation Relocator Pilot Bullbar Guard Driving Car Rear Drl. Four different locations/methods to mount any off-road pod lights, LED work lamps or LED light bar, etc. Universal mounting bracket using front license plate mount location no drill, no modification required for most cases. Made with 1.
BrandiJDMTOY #ad
ManufactureriJDMTOY Auto Accessories #ad
Part NumberAA3117-Black
ModelAA3117-Black
Warranty90 Days Replacement Exchange