As an Amazon Associate I earn from qualifying purchases.
1. Akozon #ad
Twist Drill Bit Set Akozon Tap 6pcs Metric Thread M3-M10 Titanium Coated HSS Drill and Bits 1/4" Hex Shank for Tapping and Lathe #adAkozon #ad
- Note: for detailed product parameters, refer to the instructions. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads. They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance. Taps are designed with spiral flutes and the chip clearing process would be better. Please confirm whether the product is suitable for your equipment before ordering, I wish you a happy life.
2. Thincol #ad
HSS CO Titanium Weld Spot Removal Tips, 1/4"-6.5mm 5/16"-8mm 3/8"-10mm Spot Welder Bit Cutter Drill Cutting Head Set 3 Pack, Welding Spot Weld Drill Bit #adThincol #ad
- Wide range of uses, easy to carry, fine workmanship and no burrs. Easily separate spot welded panels without twisting metal plates. Including 3pcs drill bit of 1/4in 5/16in 3/8in to meet different requirements.
The product can separate spot welding of sheet metal, panels, etc. High strength and high hardness, durable to use.
3. SIENTTO #ad
SIENTTO Hexagon Hex Allen Wrench Screwdriver Drill Bit Set 20PCS 10pc Metric & 10pc SAE 1/4 Inch Hex Shank 2.36 Inch/60 mm Length S2 Steel with Magnetic for Power Screwdriver Drill Toolkit #adSIENTTO #ad
- Strong megnetic - easy to hold the screws, convenient to use in multiple work scenarios, especially in tight space. Wide application - widely used in pneumatic screwdriver, electric screwdriver, rechargeable drill or any other power drill with 1/4 inch hex shank.
Multiple size - include 20 hex screwdriver bits, 7/32, 4mm, 1.5mm, 8mm, 7/64, 10mm, 3/16, 3/32, 1/8, 5/32, 1/4, 6mm, 2mm, 3mm, 5/64, 2.5mm, 5/16, 9/64, 5mm, 12mm, competent for various working conditions.
High precision - the precision is strictly controllled in production process, the bits are straight and concentric, not easy to slip and collapse, perfectly fits the screws, effectively reducing the bit swinging. Excellent material - the screwdriver bits are made from high quality S2 steel, high hardness, wear resistance and impact resistance, durable for long time service.
4. AMP Research #ad
AMP Research 75163-01A PowerStep Electric Running Board for 2007-2017 Sprinter Passenger Side Only #adAMP Research #ad
- Made in the usa and backed by a 5-year limited warranty. Automatic, and then hides itself safely out of sight when the doors close; Includes low-profile, electric-powered running boards instantly extend when you open your door, integrated LED light system.
Weatherproof, oem quality electric motors, drive system and wiring harness; Pressure sensitive, pinch-proof technology.
High-strength, die-cast aluminum alloy components with an anodized and PTFE-coated, military-spec finish to resist corrosion. Precision stainless steel pivot pins for rock-solid stability and maintenance free self-lubricating bushings for all-weather performance; 600 pound capacity each side.
|Brand||AMP Research #ad|
|Manufacturer||AMP Research #ad|
|Warranty||5 Year Limited Warranty|
5. Syneticusa #ad
Syneticusa Aluminum Retractable Low Profile Waterproof Tonneau Cover for 2009-2020 Ram 1500 5'7" 5.7ft Short Truck Bed #adSyneticusa #ad
- Hardware, such as mounting bracket and Bolts are included, and total installation is around 30 minutes. Low-profile patented design; Incredibly strong and easy to use. Constructed of strong, textured black finish to protects your truck bed from rain, aluminum slats and powder coated in a matte, snow, salt, leaves and more.
Need to drill holes for drainage tubes. Lockable in any position; Secures your valuable cargo or stays open whenever and wherever you need it. Uv protected; no fading, no maintenance**Does Not Fit With Multi-Function Split Tailgate.
|Warranty||Limited Lifetime Warranty|
6. Honoson #ad
Slot Wing Nuts Drill Bit Socket Wrenches Tools Set, 3 Packs Power Wing Nut Driver Set, 1/4 Inch Hex Shank Steel Drills Bits for Panel Nuts Screws Eye C Hook Bolt #adHonoson #ad
- Durable material: this little wing nut driver is made from CR-V steel, strong and sturdy, has a long service life. Practical design: up to 5x faster than you can by hand, bolts, this wing nut driver designed to tighten or loosen wing nuts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster.
Suitable size design: this wing nut driver is a perfect tool that works with any power drill 1/4 inch hex shank; The total length of the tool is about 6.
55 cm/ 2. 6 inch, the outer diameter of the socket is about 17. 8 mm/ 07 inch, and the slots on the drill bit tool is 4 mm/ 1. 55 inch wide. Easy to use: just pop it into a power screwdriver and get the wing nut/shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers; Come with 3 packs wing nut drivers, convenient for you to replace.
Harsh environment: this wing nut driver tools must have for hurricane snowstorm prone areas; The tool obviously handled exceedingly high rpms, but for safety and control, one should keep rpms low.
|Part Number||Honoson- Nuts Drill-01|
7. MBS Mfg #ad
MBS Mfg Alpha Bravo Gimbal Bearing Installer Puller and Alignment Tools for Mercruiser #adMBS Mfg #ad
- This tool is similar to mercruiser p/n 91-805475A1 which used to be P/N 91-57797A3. Engine alignment bar tool for mercruiser sterndrives including: pre-alpha "r", mr, alpha one "mr", generation ii, omc and volvo cobra bell housings.
Works on mercruiser alpha, omc cobra, alpha 1, bravo, all bravo models.100 % made in USA. As well as: volvo sx p/n 3851083 and omc comba p/n 18-4442 Tool is made from high quality 1045 Steel. Tool is made from. Gimbal bearing puller Tool Will remove bearings on Mercruisers, and Volvo.
8. Truxedo #ad
2021 Ram 1500, Does Not Fit With Multi-Function Split Tailgate 5' 7" Bed 67.4", TruXedo Pro X15 Soft Roll Up Truck Bed Tonneau Cover | 1485901 | fits 2019 #adTruxedo #ad
- All truxedo products are proudly made in the USA. Fits 2019 - 2021 ram 1500 - does not fit with multi-function Split Tailgate 5' 7" Bed 67. 4". Locate the trigger latch at the driver side of the tailgate, unlock and roll the cover up to the cab.
Sits flush with your truck bed allowing absolutely no interference with your truck's design lines. It’s that quick and that easy to open and operate this cover. No drill installation: fully install this roll-up truck bed cover in under 30 minutes! Easily clamp the rails onto your truck bed, attach the cover, roll and hit the road.
We are committed to providing you the best service at all times, if you need replacement parts simply call our team.
Matte black xtra low profile: industry-leading matte black woven fabric allows the fibers to flutter dirt and dust off the cover when your vehicle is in motion. We've got you covered: pro x15 is backed by a lifetime, no hassle warranty. Quick and easy open: simply open this cover in seconds and with just one finger. No drilling or special tools necessary.
9. Performance Tool #ad
Performance Tool W89710 Harmonic Balancer Installer #adPerformance Tool #ad
- Services harmonic balancers as well as under drive pulleys and recessed crank threads on Dodge Hemi, GM Gen III/IV, and Ford 4.
6 and 5. 4 modular engines. Works on most european and asian vehicles including BMW, VW, Honda, Toyota, Kia and Hyundai. Special adapters make this a complete master harmonic balancer installer set for most car and light truck applications.
Heavy-duty forcing screw has internal threads to fit the threaded adapters, Blow molded case keeps set components organized for easy selection. Set includes the traditional installer adapters as well as long reach adapters for late model applications.
10. Festool #ad
Festool 1/4" Ratchet and Screwdriver Bit Set 497881 #adFestool #ad
- Ratchet and centrotEC handle plus various adapters and extensions. Socket set from 4 to 13 mm, 19 different bit inserts and 2 bit extensions. Any combination of tools, hexagon tool receptions and 1/4 inch square tool inserts can be used in the CENTROTEC adapter.
Perfectly equipped for a wide range of applications. 37-piece set with flexible adapters and versatile extensions for a variety of fastening and assembly tasks.