As an Amazon Associate I earn from qualifying purchases.
Just hardwire each pigtail wire to the corresponding wire on trailer. Main purpose: works as a complete trailer tail light guard box set for your new or existing trailer, side, has stop turn tail lighting modes.
Awesome brightness: use high-quality smd led, low brightness for tail side marker light, lights output excellent high brightness red light for stop turn light, greatly improving visibility and ensuring you a safer night. Can be directly welded on or bolted on to the rear, bottom or top frame of your trailer. Simple installation: all in a set and lights are mounted on the box.

Bring your car a pure white super bright light output. 1. 2w/bulb low energy consumption for stable performance, extends lifespan up to 50, 000hrs.
The canbus capability may be limited when use the 168 led bulbs as exterior lights for few sensitive vehicles. Simple install: non-polarity design, trunk cargo light, plug and play for instant bright light in your dome light, parking light, map light, door courtesy light, license plate tag light, side marker light on your 12V cars or trucks.

Universal application: work on a 12 v dc system, tractors, function as turn/Brake light, dump Truck, trailers, travel trailer, semi-trailer, special vehicle, horse trailer, tail light for all kinds of trucks, etc.
Hole size for surface mount is: 6. Just make sure the hole size before you purchase. Fit type: Universal Fit. Awesome brightness: each tail light has 10 pcs high-quality SMD LEDs to output super bright red light, high brightness of Turn/Brake light, low brightness for Taillight, improving visibility and ensuring you a safer night.5” x 1. Upgraded unique design: niligh's tail light has unique “ears” on its two sides, and the 3-prong plug attaches tightly on the light.

6” x2. These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly to the light. Easy installation: comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire.
Shakeproof, upgrade notches on the inside of the grommet, there will be no worries of loosing light or wires. Awesome brightness: each light has 10 pcs high-quality smd LEDs to output super bright white light, low brightness for Taillight, high brightness for Reverse/Back Up light, improving visibility and ensuring you a safer night. Just make sure the hole size before you purchase.

You will need load resistor or flash relay to prevent the hyper flash when replacement for Turn Signal Lights. Please double check owners manual or original bulb number to confirm before placing an order. Advantage: non-polarity design, compatible for both ck/srck and standard socket.
Fits: 3056, 4057k, 3157nak, 4157k, 3057ll, 4114ll, 3357, 3157x, 3047, 3057klcp, 3156a, 3457ak, 3057st, 4057ll, 3157ll, 4157na, 3157nall, 4157nak, 3156na, 4157, 3757all, 3057a, 3457, 3457k, 3156k, 3057kx, 3157k, 3457na, 3157st, 3047ll, 3155ll, 3156, 4157ll, 3757ak, 3157a, 3157, 3457a, 3357all, 3156ak, 3157ak, 3457nak, 3155, 3157na, 3357ll, 3757a, 3357a, 4057, 3057, 4114, 3356, 3454na, 3357k, 3057all, 4114k, 3457all, 3157kx, 3057k, 3047k, 3057x, 3156nak, 3357kna, 5702 ect.

These help the light fit perfectly and firmly on the grommet, there will be no worries of loosing light or wires. 75”. Universal application: work on 12v dc system, special vehicle, semi-trailer, trailers, function as stop turn tail reverse light for all kinds of trucks, horse trailer, tractors, dump Truck, travel trailer, etc.
Awesome brightness: each light has 10pcs high-quality smd LEDs to output super bright white light, high brightness for Reverse/Back Up light, low brightness for Tail light, improving visibility and ensuring you a safer night. Upgraded unique design: niligh's tail light has unique “ears” on its two sides, and the 3-prong plug attaches tightly on the light. 5” x 1. 6” x2. Just make sure the hole size before your purchase.

Warranty does not cover labor, towing, rental car, diagnostics, or any other expense related to an item being defective/damaged. Brilliant illumination: t10 194 168 led bulbs produce plenty of light to improve illumination while adding a modern touch to your vehicle's lighting.
Use on license plate Light, Stepwell Light, Dome Map Light. Fit size: 194, 159, 152, 193, 12961, 161, parking light, interior door light, trunk cargo light, 184, 147, 2825, W5W, 168, t10, 175, 158, 192, etc. Warranty: 1-year hassle free warranty. Perfect fit: from interior lighting to license plate and marker lights, the T10/194 fitment is easily one of the most common sizes used on your cars.

75”. 5” x 1. 6” x2. Easy installation: comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire.
Shake proof, upgrade notches on the inside of the grommet, and a tighter attaching ability between the 3-prong plug and it. Universal application: work on a 12 v dc system, horse trailer, function as left turn signals right turn signals light, travel trailer, special vehicle, tail light for all kinds of trucks, trailers, tractors, semi-trailer, dump Truck, etc. Just make sure the hole size before you purchase.


1. Nilight
#ad
TL-34 2PCS Steel Trailer Light Boxes Housing Kit w/6Inch Oval Red LED Trailer Tail Lights 2 Inch Round Red LED Side Marker Lights w/Grommet Plugs Wire connectors, 2 Years Warranty, Nilight
#adNilight #ad - And then weld on or bolt on the light box to the trailer frame. Color coded wires: white wire with O ring terminal for ground, black wire for tail side marker light, red wire for stop turn light. Durable for all weather elements.Just hardwire each pigtail wire to the corresponding wire on trailer. Main purpose: works as a complete trailer tail light guard box set for your new or existing trailer, side, has stop turn tail lighting modes.
More information #ad
Solid built : made of heavy duty steel, painted with quality black powder-coated finish, and pre-cut holes for 6” oval light, 2” round side light & license plate mounting. Awesome brightness: use high-quality smd led, low brightness for tail side marker light, lights output excellent high brightness red light for stop turn light, greatly improving visibility and ensuring you a safer night. Can be directly welded on or bolted on to the rear, bottom or top frame of your trailer. Simple installation: all in a set and lights are mounted on the box.
Brand | Nilight #ad |
Manufacturer | Nilight #ad |
Weight | 1.5 Pounds |
Part Number | TL-34 |
Model | TL-34 |
Warranty | 2 Years Warranty |
More information #ad
2. AUXITO
#ad
Pack of 10, AUXITO 194 LED Light Bulb 6000K White 168 2825 W5W T10 Wedge 14-SMD LED Replacement Bulbs for Car Dome Map Door Courtesy License Plate Lights
#adAUXITO #ad - Package includes: 10 pieces of 194 led bulbs. 1:1 mini size: almost the same size like stock 194 halogen bulbs. 50, 000hrs lifespan: full aluminum body design for quicker heat dissipation. Thick plug design ensures the 2825 led bulbs fit tightly fir all T10 wedge type, 168, 161, 174, W5W, 2825, 175, compatible with 194, etc.Bring your car a pure white super bright light output. 1. 2w/bulb low energy consumption for stable performance, extends lifespan up to 50, 000hrs.
More information #ad
360° lighting angle, no dark spots, huge brightness. 300% brighter: auxito 194 led bulbs equipped with 14 pieces 6000k~6500k white high illumination 2835 SMD LED. The canbus capability may be limited when use the 168 led bulbs as exterior lights for few sensitive vehicles. Simple install: non-polarity design, trunk cargo light, plug and play for instant bright light in your dome light, parking light, map light, door courtesy light, license plate tag light, side marker light on your 12V cars or trucks.
Brand | AUXITO #ad |
Manufacturer | AUXITO #ad |
Weight | 0 Pounds |
Part Number | AUXITO-US14ET10W10-0203 |
Warranty | 1 year warranty on parts only |
More information #ad
3. Nilight
#ad
2 Years Warranty, Nilight, TL-01 6" Oval Red LED Tail 2PCS w/Surface Mount Grommets Plugs IP65 Waterproof Stop Brake Turn Trailer Lights for RV Truck Jeep
#adNilight #ad - 6” x2. Shake proof, upgrade notches on the inside of grommet, and a tighter attaching ability between 3-prong plug and it. For installation, and then connect the 3 wires to the corresponding wires on vehicles. 75”. Ready for the weather: be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack.Universal application: work on a 12 v dc system, tractors, function as turn/Brake light, dump Truck, trailers, travel trailer, semi-trailer, special vehicle, horse trailer, tail light for all kinds of trucks, etc.
More information #ad
Easy installation: the taillight comes with grommets for surface mount, you just need to surface mount the grommets & light setup, also added a 3-prong watertight plug with attached wire. These help the light fit perfectly and firmly on the grommet, there will be no worries of loosing light or wires. Hole size for surface mount is: 6. Just make sure the hole size before you purchase. Fit type: Universal Fit. Awesome brightness: each tail light has 10 pcs high-quality SMD LEDs to output super bright red light, high brightness of Turn/Brake light, low brightness for Taillight, improving visibility and ensuring you a safer night.5” x 1. Upgraded unique design: niligh's tail light has unique “ears” on its two sides, and the 3-prong plug attaches tightly on the light.
Brand | Nilight #ad |
Manufacturer | Nilight #ad |
Part Number | TL-01 |
Model | TL-01 |
Warranty | 2 Years Warranty |
More information #ad
4. Nilight
#ad
2 Years Warranty, Nilight, TL-09 6 Inch Oval White LED Trailer Tail Lights 2PCS 10 LED w/Flush Mount Grommets Plugs IP67 Waterproof Reverse/Back Up Trailer Lights for RV Truck Jeep
#adNilight #ad - 75”. 5” x 1. Hole size for surface mount is: 6. Ready for the weather: be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack. Universal application: work on a 12 v dc system, trailers, function as the reverse /back up, tractors, horse trailer, special vehicle, tail light for all kinds of trucks, semi-trailer, dump Truck, travel trailer, etc.6” x2. These help the light fit perfectly and firmly on the grommet, and the 3-prong plug attaches tightly to the light. Easy installation: comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire.
More information #ad
Upgraded unique design: light has unique “ears” on its two sides, and a tighter attaching ability between the 3-prong plug and it. For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. Shakeproof, upgrade notches on the inside of the grommet, there will be no worries of loosing light or wires. Awesome brightness: each light has 10 pcs high-quality smd LEDs to output super bright white light, low brightness for Taillight, high brightness for Reverse/Back Up light, improving visibility and ensuring you a safer night. Just make sure the hole size before you purchase.
Brand | Nilight #ad |
Manufacturer | Nilight #ad |
Part Number | TL-09 |
Model | TL-09 |
Warranty | 2 Years Warranty |
More information #ad
5. iBrightstar
#ad
IBrightstar Newest 9-30V Super Bright Low Power 3157 4157 3057 3156 LED Bulbs with Projector Replacement for Back Up Reverse Lights and Tail Brake Parking Lights, Xenon White
#adiBrightstar #ad - Any other problem please feel free to contact us, we are always here to satisfy of you. More than 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution, built in Constant Current IC for Longer life span & Low Power Consumption.You will need load resistor or flash relay to prevent the hyper flash when replacement for Turn Signal Lights. Please double check owners manual or original bulb number to confirm before placing an order. Advantage: non-polarity design, compatible for both ck/srck and standard socket.
More information #ad
Application: back up reverse lights, side marker lights, Brake Lights, Tail Lights, parking Lights, Daytime Running Lights etc. Set of 2 bulbs 54smd 3014 & 3smd 3030 high brightness chips per bulb, Working Voltage: 9v-30v fit 12V, 24V vehicles. Fits: 3056, 4057k, 3157nak, 4157k, 3057ll, 4114ll, 3357, 3157x, 3047, 3057klcp, 3156a, 3457ak, 3057st, 4057ll, 3157ll, 4157na, 3157nall, 4157nak, 3156na, 4157, 3757all, 3057a, 3457, 3457k, 3156k, 3057kx, 3157k, 3457na, 3157st, 3047ll, 3155ll, 3156, 4157ll, 3757ak, 3157a, 3157, 3457a, 3357all, 3156ak, 3157ak, 3457nak, 3155, 3157na, 3357ll, 3757a, 3357a, 4057, 3057, 4114, 3356, 3454na, 3357k, 3057all, 4114k, 3457all, 3157kx, 3057k, 3047k, 3057x, 3156nak, 3357kna, 5702 ect.
Brand | iBrightstar #ad |
Manufacturer | iBrightstar #ad |
Height | 0.67 Inches |
Length | 1.82 Inches |
Weight | 0.03 Pounds |
Width | 0.88 Inches |
Part Number | iBrightstar-3157-3014/3030-54/3W |
Model | 3157-3014/3030-54/3W |
More information #ad
6. Nilight
#ad
Nilight 6" Oval LED Trailer Tail Lights 10 LED w/Flush Mount Grommets Plugs Stop Turn Tail Reverse Back Up Trailer Lights for RV Truck Jeep TL-25
#adNilight #ad - Shake proof, upgrade notches on the inside of grommet, and a tighter attaching ability between 3-prong plug and it. Hole size for surface mount is: 6. Ready for the weather: silicon sealed, IP65 waterproof rating, ready for different kinds of weather attack.These help the light fit perfectly and firmly on the grommet, there will be no worries of loosing light or wires. 75”. Universal application: work on 12v dc system, special vehicle, semi-trailer, trailers, function as stop turn tail reverse light for all kinds of trucks, horse trailer, tractors, dump Truck, travel trailer, etc.
More information #ad
For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. Easy installation: the taillight comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire. Awesome brightness: each light has 10pcs high-quality smd LEDs to output super bright white light, high brightness for Reverse/Back Up light, low brightness for Tail light, improving visibility and ensuring you a safer night. Upgraded unique design: niligh's tail light has unique “ears” on its two sides, and the 3-prong plug attaches tightly on the light. 5” x 1. 6” x2. Just make sure the hole size before your purchase.
Brand | Nilight #ad |
Manufacturer | Nilight #ad |
Part Number | TL-25 |
Model | TL-25 |
Warranty | 2 Years Warranty |
More information #ad
7. LASFIT
#ad
12-24V, Non-Polarity 400LM Extremely Bright for Dome Map Courtesy Door License Plate Trunk Cargo Lights, Blue Pack of 2, LASFIT 194 168 T10 192 2825 W5W LED Bulb Canbus Error Free
#adLASFIT #ad - Attention: for jeep renegade cherokee, passat and some for mercedes-benz canbus still can't prevent error message, jetta, we don't recommend you use them on the license plate light and parking light.45 days return.Warranty does not cover labor, towing, rental car, diagnostics, or any other expense related to an item being defective/damaged. Brilliant illumination: t10 194 168 led bulbs produce plenty of light to improve illumination while adding a modern touch to your vehicle's lighting.
More information #ad
For nissan 300zx 1993~1994 and for hyundai ioniq limited 2019, for Volkswagen GTI Tiguan, we don’t recommend you use them on map light. Use on license plate Light, Stepwell Light, Dome Map Light. Fit size: 194, 159, 152, 193, 12961, 161, parking light, interior door light, trunk cargo light, 184, 147, 2825, W5W, 168, t10, 175, 158, 192, etc. Warranty: 1-year hassle free warranty. Perfect fit: from interior lighting to license plate and marker lights, the T10/194 fitment is easily one of the most common sizes used on your cars.
Brand | LASFIT #ad |
Manufacturer | LASFIT #ad |
Part Number | LX001-T10/194B |
Model | L-T10B |
More information #ad
8. Nilight
#ad
2 Years Warranty, Nilight, TL-08 6 Inch Oval Amber LED Trailer Tail Lights 2PCS 10 LED W/Flush Mount Grommets Plugs IP67 Waterproof Turn Signals Trailer Lights for RV Truck Jeep
#adNilight #ad - Upgraded unique design: light has unique “ears” on its two sides, and the 3-prong plug attaches tightly to the light. Ready for the weather: be highly silicon sealed, IP67 waterproof rating, always be ready for different kinds of weather attack. Awesome brightness: each light has 10 pcs high-quality SMD LEDs to output super bright amber light, low brightness for Taillight, high brightness of turn signal light, improving visibility and ensuring you a safer night.75”. 5” x 1. 6” x2. Easy installation: comes with grommets for surface mount, also added a 3-prong watertight plug with attached wire.
More information #ad
Hole size for surface mount is: 6. For installation, you just need to surface mount the grommets & light setup, and then connect the 3 wires to the corresponding wires on vehicles. These help the light fit perfectly and firmly on the grommet, there will be no worries of loosing light or wires. Shake proof, upgrade notches on the inside of the grommet, and a tighter attaching ability between the 3-prong plug and it. Universal application: work on a 12 v dc system, horse trailer, function as left turn signals right turn signals light, travel trailer, special vehicle, tail light for all kinds of trucks, trailers, tractors, semi-trailer, dump Truck, etc. Just make sure the hole size before you purchase.
Brand | Nilight #ad |
Manufacturer | Nilight #ad |
Weight | 0.88 Pounds |
Part Number | TL-08 |
Model | TL-08 |
Warranty | 2 Years Warranty |
More information #ad
9. Vouke
#ad
Vouke 38 LED 12V Universal Tail Brake Turn Stop Licence Back up Lights for Truck Trailer Boat etc,12V Stud Mounted Lamps,Pack of 2
#adVouke #ad - Universal for 12v vehicles like Truck, caravan, bus, Lorry, Boat, Trailer, Van, etc. 12 volts; Low ampere draw. 3-stud mounted design, 4 color wire connection. 18 white leDs for backup function.More information #ad
4 white leDs for license illuminator. D ot compliant for street legal lighting. Each with 38 super bright leds:16 red leds for stop/turn/tail functions. Resistant polycarbonate housing and acrylic lens are sealed to prevent damage from moisture and corrosion.Brand | Vouke #ad |
Manufacturer | VOUKE US #ad |
Height | 50 Centimeters |
Length | 100 Centimeters |
Weight | 100 Kilograms |
Width | 100 Centimeters |
Part Number | VK-TL038 |
More information #ad
10. iBrightstar
#ad
IBrightstar 50W 6ohm Load Resistors for Fix LED Bulb Fast Hyper Flash Turn Signal Blink Error Code
#adiBrightstar #ad - Just connect the wires with the splice taps provided and no wire cutting is necessary. Notice! load resistors heat up like light bulbs and get super HOT when working. 2pcs 50w 6ohm load resistors + 4PCS Quick wire Clip.More information #ad
Make sure you mount them away from any wires or plastic. Prevent led turn signal lights or License Plate Brake Lights from hyper flashing, malfunction or trigger warning message on dashboard. Easy installation. One resistor is required for each turn signal bulb or each license plate light bulb.Brand | iBrightstar #ad |
Manufacturer | iBrightstar #ad |
Height | 0.61 Inches |
Length | 1.97 Inches |
Weight | 0.05 Pounds |
Width | 1.1 Inches |
Part Number | iBrightstar-resistor-50W/6ohm |
More information #ad