As an Amazon Associate I earn from qualifying purchases.


Wide applicationthe battery terminal connectors can be used for Trailer, Jeep, Caravan, Vans, Boat, Winch, Truck, Tractor, RV, Cars, etc. Excellent qualitywith superior corrosion resistance and electrical conductivity, the tinned copper quick release battery terminal also can reduce voltage distortion and transmission loss.
4 way battery terminalthere are 4 posts for wire connection in the battery terminal connectors which are mainly used for SAE / JIS Type A car battery. And the battery terminal works great for replacing worn out and corroded terminals. The purpose of the design is for multiple cable connections.

Superior construction: the BAF-1 replacement Side Terminal Charging Posts feature heavy-duty zinc-coated construction. Reliable: the schumacher baf-1 zinc-Coated Side Terminal Charging Posts are three times more conductive than other charging posts.



2. If you have any questions about the product, Max 48V DC 80 Amp, we will answer you within 24 hours.
Wide application: aulesse battery distribution terminal block set for 48V cars, boats, trucks, trailers, RVs and also for electrical equipment and solar energy. Function: allowing for the termination of one or more connected heavy-duty cables, these distribution posts make it easier to power multiple accessories from one source.

Widely applicable: our battery terminal connectors suitable for cars, caravan, truck batteries, motorhomes, vans, etc. Max wire clamp: 9. 5mm/037in, mini wire clamp: 6. 5mm/025in. Minimum wire size: 16mm 5/8".
Size: for wires diameters 5. 2 - 7. 4mm awg gauges 1 - 4. Enjoy warranty: you will get quality products, please contact us, if you have any questions, we are always waiting for you here.

Direct replacement - this battery terminal bolt matches the fit and function of the factory part on specified years, makes and models.

1. WirthCo
#ad
WirthCo 30500 Battery Doctor Double Cable Side Mount Terminal Battery Bolt
#adWirthCo #ad - Double cable side Terminal Bolt for GM Trucks. Battery insert:. 250" long, stud thread: 3/8-16, Stud Length:. 960". Ideal for rvs with dual batteries running in parallel. Overall length: 1. 832, " nominal diameter: 5/8" hex, Coupler Thread: 3/8-16.More information #ad
Brand | WirthCo #ad |
Manufacturer | WirthCo #ad |
Height | 4.5 Inches |
Length | 0.8 Inches |
Weight | 0.11 Pounds |
Width | 3.5 Inches |
Part Number | 30500 |
Model | 30500 |
More information #ad
2. Rockford Fosgate
#ad
Rockford Fosgate RFDGML GM Battery Post Extender For Double Stacked Terminals
#adRockford Fosgate #ad - Gm battery post extender for double stacked terminals, platinum finish. Country of origin: CHINA. Package weight: 1. 0 lbs. Gm battery Post Adapters.More information #ad
Brand | Rockford Fosgate #ad |
Manufacturer | Rockford Fosgate #ad |
Height | 5.5 Inches |
Length | 19.7 Inches |
Weight | 0.21 Pounds |
Width | 8.7 Inches |
Part Number | RFDGML |
Model | RFDGML |
More information #ad
3. ZONBANG
#ad
Positive Negative Battery Cable Ends for SAE/JIS Type A Posts by ZONBANG, 4 Way Quick Release Disconnect Battery Terminals, 2PCS Battery Terminal Connectors
#adZONBANG #ad - Tip: make sure to choose the correct terminal for the correct polarity. Easy to identifywith the signs of positive “+” and negative “-”, the quick disconnect battery terminal is easy to identify.Wide applicationthe battery terminal connectors can be used for Trailer, Jeep, Caravan, Vans, Boat, Winch, Truck, Tractor, RV, Cars, etc. Excellent qualitywith superior corrosion resistance and electrical conductivity, the tinned copper quick release battery terminal also can reduce voltage distortion and transmission loss.
More information #ad
Package includeyou will receive 2pcs battery terminal connectorspositive and negative, 2PCS anti-corrosion fiber washers and an allen wrench. 4 way battery terminalthere are 4 posts for wire connection in the battery terminal connectors which are mainly used for SAE / JIS Type A car battery. And the battery terminal works great for replacing worn out and corroded terminals. The purpose of the design is for multiple cable connections.
Brand | ZONBANG #ad |
Manufacturer | ZONBANG #ad |
Height | 0.71 Inches |
Length | 4.9 Inches |
Width | 3.35 Inches |
Part Number | BTE-2 |
Model | BTE-2 |
More information #ad
4. Schumacher
#ad
Schumacher BAF-1 Zinc-Coated Side Terminal Charging Posts – Pair – Three Times More Conductive
#adSchumacher #ad - Built green: meets the standards established for RoHS Restriction of Hazardous Substances compliance. Long-lasting quality: trust schumacher Electric for reliable and well-made battery accessories.Superior construction: the BAF-1 replacement Side Terminal Charging Posts feature heavy-duty zinc-coated construction. Reliable: the schumacher baf-1 zinc-Coated Side Terminal Charging Posts are three times more conductive than other charging posts.
More information #ad
Schumacher has been producing quality automotive products since 1947. Usable: the baf-1 includes one positive and one negative battery cable terminal. Easy to use: the baf-1 replacement terminal posts easily screw into place.Brand | Schumacher #ad |
Manufacturer | Schumacher #ad |
Part Number | BAF-1 |
Model | BAF-1 |
Warranty | 1 Year Warranty |
More information #ad
5. YUNSHUO
#ad
YUNSHUO Motorcycle Battery Terminal Nut and Bolt Kit M6x12mm Bike Scooter Universal
#adYUNSHUO #ad - Please leave a note if you need M5. Suitable for all common 6-7Ah batteries Thread: M6. Specifications type: battery terminal bolts overall bolt length: 16mm bolt Hex Head Size: 10mm Bolt Thread Length: 12mm approx Square Nut Spanner Size: 11x8mm Square Nut Thickness: 4mm Material: Steel.More information #ad
Brand | YUNSHUO #ad |
Manufacturer | YunShuo #ad |
Part Number | Does Not Apply |
More information #ad
6. Coleman Cable
#ad
Woods Road Power 923-2 Top Post Battery Terminal Bolts and Nuts, 6 and 12-Volt, Chrome, 2-Pack
#adColeman Cable #ad - Industry approvals: RoHs compliant. 1-1/4-inch bolt and 12mm nut for replacement battery terminal bolts and nuts. Plated Steel construction. Intended use for: top post, truck, side post, and marine battery terminals. Top post battery terminal bolts and nuts.More information #ad
Brand | Coleman Cable #ad |
Manufacturer | Coleman Cable #ad |
Height | 2 Inches |
Length | 5 Inches |
Weight | 1 Pounds |
Width | 4 Inches |
Part Number | 923-2 |
Model | 923-2 |
Warranty | No Warranty |
More information #ad
7. AULESSE
#ad
AULESSE Battery Power Terminal Block-Terminal Stud M8,5/16'' Insulated Power Distribution Double Type Stainless Steel Terminal Bolts for Truck RV BoatRed+Black
#adAULESSE #ad - Easy installation:the terminal has two mounting holes, which can be installed in any direction, just place the terminal where you need to install it and tighten the screws. Warm prompt:1. Heavy duty positive terminal 5/16’’ studs m8, please feel free to contact the AULESSE team, 1 pack, with mounting screw.2. If you have any questions about the product, Max 48V DC 80 Amp, we will answer you within 24 hours.
More information #ad
Safe & premium materials: our battery post bases are made of flame retardant plastic fiberglass reinforced nylon, the nut studs are made of high quality stainless steel, and the spacers are copper. Wide application: aulesse battery distribution terminal block set for 48V cars, boats, trucks, trailers, RVs and also for electrical equipment and solar energy. Function: allowing for the termination of one or more connected heavy-duty cables, these distribution posts make it easier to power multiple accessories from one source.
Brand | AULESSE #ad |
Manufacturer | AULESSE #ad |
Height | 1.69 Inches |
Length | 1.77 Inches |
Width | 1.26 Inches |
Part Number | YS1001 |
More information #ad
8. SINGARO
#ad
SINGARO Car Battery Terminal Connector is Applicable to SAE/JIS Type A Terminal Accessories, Trucks and More, Compatible with Cars
#adSINGARO #ad - High-quality: made of tinned copper, it has 4 ports for multiple cable connections, with good electrical conductivity and corrosion resistance, mainly used for SAE / JIS TYPE A rear car battery.Widely applicable: our battery terminal connectors suitable for cars, caravan, truck batteries, motorhomes, vans, etc. Max wire clamp: 9. 5mm/037in, mini wire clamp: 6. 5mm/025in. Minimum wire size: 16mm 5/8".
More information #ad
Positive inner diameter: 17. 5~19. 1mm, negative inner diameter: 15. 9~17. 5mm. Please be sure to connect correct terminal to correct polarity. You well get: package contains 2 battery terminal connectors positive and negative, 1 Battery Terminal Cleaners, 4 Terminal block, 4 insulation sleeves, 2 battery anti-corrosion washers and a hex wrench. Size: for wires diameters 5. 2 - 7. 4mm awg gauges 1 - 4. Enjoy warranty: you will get quality products, please contact us, if you have any questions, we are always waiting for you here.
Brand | SINGARO #ad |
Manufacturer | SINGARO #ad |
Height | 0.1 Inches |
Length | 0.3 Inches |
Width | 0.2 Inches |
Part Number | SINGARO-GVSC |
More information #ad
9. Dorman
#ad
Dorman 60310 3/8In.-16 x 15/16In. Stud Length, 1-5/8In. Long Side Terminal Bolts With Spacer
#adDorman #ad - Ideal solution - this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue. Durable construction - this part is made from quality materials to ensure reliable performance and long service life.Direct replacement - this battery terminal bolt matches the fit and function of the factory part on specified years, makes and models.
More information #ad
Cost-effective - has similar performance to part that originally came on vehicle, but is priced far below getting replacement from dealership. Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.Brand | Dorman #ad |
Manufacturer | Dorman Products #ad |
Height | 0.9 Inches |
Length | 1.8 Inches |
Weight | 0.12 Pounds |
Width | 5.4 Inches |
Part Number | 60310 |
Model | 60310 |
Warranty | Limited Lifetime Warranty |
More information #ad
10. Ampper
#ad
Ampper Remote Battery Binding Post Junction Post Block Terminal Kit, Pack of 2 Red and Black, 1/4" Copper Battery Terminal Stud Connector
#adAmpper #ad - Made of copper with red and black mark, used to connect two or more connectors / wires, as remote battery junction post for battery power and ground junction. Easy to install: 2 sets of nut systems make it simple and flexible to extend, tighten and assemble the connector.More information #ad
100% satisfaction : no reason for return or change, hassle free 1 years. Mount in panels or battery box, can hook the wires inside and outside. Compatible: used for battery box and panels, for car, vehicle, Rv and boat, also electrical equipment and solar cells etc.Brand | Ampper #ad |
Manufacturer | Ampper #ad |
Height | 0.7 Inches |
Length | 2 Inches |
Weight | 0.11 Pounds |
Width | 0.7 Inches |
Part Number | Am-BJB03 |
More information #ad