Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector


#ad
#ad
Crazepony #ad - Dimension: 54mm * 12. 5mm * 6mm, Weight: 6. 3g/per unit. This battery will give you higher rpms more power and a considerably longer flight time. High density with great safety fits tiny whoop--------------------Package Including4 * 230mAh HV 1S Lipo Battery 30C 3. 8v jst-ph 2. 0 connector newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation.

. 4pcs 230mah hv 1s lipo Battery 30C 3. 8v for tiny whoop blade Inductrix JST-PH 2. 0 connectorfeatures:item: hv 1s crazepony Lipo BatteryRate: 30CDimension: 54mm * 12. 5mm * 6mmWeight: 6. 3g/per unitcapacity: 230mah in standard voltage, 250mAh in high voltageThe connector plug: JST-PH 2. 0 aka high current ultra micro, mcpxthis battery is lighter than the usual 230mah battery, Powerwhoop, and can be charged to either standard voltage 4.

Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector #ad - 2v, 230mah or high voltage 4. 35v, 250ish mah. This is newly developed chemistry for a longer lifetime and safer charging situation. Capacity: standard voltage 4. 2v, 230mahor High voltage 4.

More information about Crazepony #ad

Wolfwhoop WT05 Micro AIO 600TVL Camera Only 3.4g 5.8GHz 25mW FPV Transmitter with Dipole Brass Antenna Combo for FPV Quadcopter Drone

#ad
#ad
Sinopine WT05 #ad - It is a combination of a FPV camera, a transmitter and an antenna. It includes everything into a single unit no bigger than one dollar coin. Easy installation for racing drone, Only 3. 4g. Button contro l instead of switches to change channels. Description : the AIO Camera combo is perfect for ultra micro drone.

Micro size and light weight only 3. 4g specification: Frequency:5. 8ghz 6 bands 48 channels, with raceband: 5658-5917MHz Output power:25mW Input voltage: 3. 3v-5. 5v current consumption: 280matyp camera resolution: 600tvl field of view: 120° Video Format:NTSC Antenna: Dipole Brass Antenna Size: 15X 12.

Wolfwhoop WT05 Micro AIO 600TVL Camera Only 3.4g 5.8GHz 25mW FPV Transmitter with Dipole Brass Antenna Combo for FPV Quadcopter Drone #ad - 5mmlx w weight: 3. 4g package included: 1 x wt05 aio fpv camera with cable 1 X User Manual 1 X Cable Power by 1S lipo battery. The aio camera combo is perfect for ultra micro drone. All in one vtx + camera + antenna, plug and play, ready to fly.

More information about Sinopine WT05 #ad


Similar products



Crazepony 4pcs 6x15mm Motor Speed: Insane 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings

#ad
#ad
Crazepony #ad - Insane for blade inductrix, Tiny Whoop, Nano QX etc. The aio camera combo is perfect for ultra micro drone. All in one vtx + camera + antenna, plug and play, ready to fly. Speed: insane, 19000kv / 70000 rpm. Weight: 1. 8g each, quantity: 4 pcs 2 CW and 2 CCW. Description:motor diameter: 6mmMotor Length: 15mmShaft Diameter: 0

Crazepony 4pcs 6x15mm Motor Speed: Insane 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings #ad - 8mmcable length: 56mmWeight: 1. 8g eachno load speed: 70000±15% rpmrated load speed: 40500±15% rpmMotor wire: Clockwise MotorWith Red Blue, Anti-clockwise MotorWith Black WhiteOption: With 1. 25mm jst plugquantity: 4 pcs 2 cw and 2 ccwwork for blade inductrix, tiny Whoop, Nano QX etcBonus rubber ringsPackage Including2 * CW motor2 * CCW motor Power by 1S lipo battery.

Shaft diameter: 08mm, motor length: 15mm, motor Diameter: 6mm, Cable Length: 56mm. With 1. 25mm jst plug, perfect for Inductrix FC. Easy installation for racing drone, Only 3. 4g. Button contro l instead of switches to change channels.

More information about Crazepony #ad


Similar products



2pcs CX405 1S LiPo Battery USB Charger 4.2V 4.35V LiPo LiHV JST-PH 2.0 mCPX Connectors Tiny Whoop

#ad
#ad
Crazepony #ad - Battery charging interface current output range: 500mA x 4CH on USB 5V/2A. Shaft diameter: 08mm, motor diameter: 6mm, motor length: 15mm, Cable Length: 56mm. Switch charging lipo3. 7/4. 20vand li-hv3. 8/4. 35v by pressing button 3 sec, ONLY support One type at a time. Speed: insane, 19000kv / 70000 rpm. With 1. 25mm jst plug, perfect for Inductrix FC.

Insane for blade inductrix, Tiny Whoop, Nano QX etc. The aio camera combo is perfect for ultra micro drone. Note: pls plug into power supply first, and puncture the hole, then the charger will change charging modes. Usb power supply interface input range: 5V±5% on 052a. Weight: 1. 8g each, quantity: 4 pcs 2 CW and 2 CCW.

2pcs CX405 1S LiPo Battery USB Charger 4.2V 4.35V LiPo LiHV JST-PH 2.0 mCPX Connectors Tiny Whoop #ad - 2pcs cx405 1s lipo battery USB Charger 4. 2v 4. 35v lipo lihv jst-pH 2. 0 mcpx connectors tiny whoop note: pls plug into power supply first, and puncture the hole, then the charger will change charging modes. Features:usb standard power supply interface, simple operation, plug and playFour channels independent charging output, can charge four batteries simultaneouslySupport switch LiPo 3.

More information about Crazepony #ad


Similar products



Crazepony Mini Quadcopter Frame Kit with Props Removal Tool for Tiny Whoop Eachine E010 JJRC H36 Quadcopter

#ad
#ad
Crazepony #ad - Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. All in one vtx + camera + antenna, plug and play, ready to fly. The 4 led lights indicate the charging state of the four channels independently, LED flashing indicates charging, LED solid indicates full charged. Suitable for tiny whoop, eacHINE E010 and other DIY micro quadcopter.

Product dimensions: 102x22x12mm/each, product weight: 15g/each. Flight components will fit without modifications required. Weight: 1. 8g each, quantity: 4 pcs 2 CW and 2 CCW. Including 1pc quadcopter frame, 8pcs 4-leaf red propellers, 2pcs Foam Battery Compartment Adaptors random color and 1pcs Props Removal Tool.

Crazepony Mini Quadcopter Frame Kit with Props Removal Tool for Tiny Whoop Eachine E010 JJRC H36 Quadcopter #ad - Shaft diameter: 08mm, motor diameter: 6mm, motor length: 15mm, Cable Length: 56mm. Switch charging lipo3. 7/4. 20vand li-hv3. 8/4. 35v by pressing button 3 sec, ONLY support One type at a time. Battery charging interface current output range: 500mA x 4CH on USB 5V/2A.

More information about Crazepony #ad


Similar products



Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop for Quadcopter Camera

#ad
#ad
Crazepony #ad - Shaft diameter: 08mm, motor diameter: 6mm, motor length: 15mm, Cable Length: 56mm. Switch charging lipo3. 7/4. 20vand li-hv3. 8/4. 35v by pressing button 3 sec, ONLY support One type at a time. Frame wheelbase: 67mm, Frame weight: 5g. This is a camera/vtx mount for the blade inductrix. Only fit for fx798t fx797T MC-01 camera.

This fpv canopy weights at 23g. Battery charging interface current output range: 500mA x 4CH on USB 5V/2A. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. 3pcs inductrix fpv camera mount tiny whoop for Quadcopter CameraSummary:This is a Camera/VTX mount for the Blade Inductrix. Only fit for fx798t fx797T MC-01 camera.

Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop for Quadcopter Camera #ad - Weighs in at 2~3g. Slip the cameras power wires through the hole in the mount, and seat the camera in the mount. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. 20 degree mount Works well with the 1. 8 lense on these cameras. All stock hardware is used, super simple installation.

The aio camera combo is perfect for ultra micro drone.

More information about Crazepony #ad


Similar products



Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX

#ad
#ad
Crazepony #ad - The 4 led lights indicate the charging state of the four channels independently, LED flashing indicates charging, LED solid indicates full charged. Suitable for tiny whoop, eacHINE E010 and other DIY micro quadcopter. Flight components will fit without modifications required. Shaft diameter: 08mm, motor length: 15mm, motor Diameter: 6mm, Cable Length: 56mm.

Switch charging lipo3. 7/4. 20vand li-hv3. 8/4. 35v by pressing button 3 sec, ONLY support One type at a time. Weight: 1. 8g each, quantity: 4 pcs 2 CW and 2 CCW. Crazepony 1s lipo battery charging board blade inductrix ultra micro JST-PH Parallel Connect Plate Specifications:Input Charge Connector: Male 4mm Banana PlugOutput Connector: 6x Micro JST 1.

Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX #ad - 25; 6x jst-ph 2. 0wire type: 18 awg charge LeadMax Charge Rating: 1. 5a per batteryFuse Rating: 1. 5aboard size: 62. 5x32x5mmweight: 17git needs to connect to a lipo charger for charging batterySuitable for battery of Blade Inductrix, Glimpse, mCP X, Nano QX 3D, Nano CP X, Nano QX etc*Micro JST 1.25 aka ultra micro jst, pico, mCX, Molex 1.

More information about Crazepony #ad


Similar products



BETAFPV 3 Sets 6X15mm Motor 19500KV Brushed Motor Speed Insane for Micro FPV Tiny Whoop Eachine012 or Beta65 etc

#ad
#ad
BETAFPV #ad - Charge 6 batteries at the same time, keep your tiny whoop staying in the air. Suitable for battery of blade inductrix, mCP X, Nano CP X, Glimpse, nano QX 3D, Nano QX etc. Kv value is show on motor for pilots to distinguish the speed quickly. Just fit for eachine012, Eachine010s, Beta65 BNF etc. Special sauce edition 19500kv / 72, 000 [email protected]

7v. Motor diameter: 6mm, motor length: 15mm, With 1. 25mm jst Plug. The weight of the betafpv 615 19500KV Motor is about 1. 8g/pcs. The 4 led lights indicate the charging state of the four channels independently, LED flashing indicates charging, LED solid indicates full charged. Suitable for tiny whoop, eacHINE E010 and other DIY micro quadcopter.

BETAFPV 3 Sets 6X15mm Motor 19500KV Brushed Motor Speed Insane for Micro FPV Tiny Whoop Eachine012 or Beta65 etc #ad - The aio camera combo is perfect for ultra micro drone. This is a camera/vtx mount for the blade inductrix. Only fit for fx798t fx797T MC-01 camera. This fpv canopy weights at 23g. Frame wheelbase: 67mm, Frame weight: 5g. Do you value performance over flight time and motor life in a crazy way? These are your motors.

More information about BETAFPV #ad


Similar products



BETAFPV 10pcs Upgraded Tiny Whoop JST-PH 2.0 Power Whoop Female Connector Cable 55mm for Blade Inductrix

#ad
#ad
BETAFPV #ad - Including 1pc quadcopter frame, 8pcs 4-leaf red propellers, 2pcs Foam Battery Compartment Adaptors random color and 1pcs Props Removal Tool. The 4 led lights indicate the charging state of the four channels independently, LED flashing indicates charging, LED solid indicates full charged. Suitable for tiny whoop, eacHINE E010 and other DIY micro quadcopter.

Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. Easy installation for racing drone, Only 3. 4g. Upgrade jst-ph 2. 0 connector, aka powerWhoop connector, the pins will not loose easily. Note: pls plug into power supply first, and puncture the hole, then the charger will change charging modes.

BETAFPV 10pcs Upgraded Tiny Whoop JST-PH 2.0 Power Whoop Female Connector Cable 55mm for Blade Inductrix #ad - Usb power supply interface input range: 5V±5% on 052a. Suitable for battery of blade inductrix, Nano CP X, nano QX 3D, mCP X, Glimpse, Nano QX etc. Kv value is show on motor for pilots to distinguish the speed quickly. Just fit for eachine012, Eachine010s, Beta65 BNF etc. Special sauce edition 19500kv / 72, 000 [email protected]

More information about BETAFPV #ad


Similar products



1S LiPo Battery USB Charger 3.7V/4.20V 6 Channel 1S LiPo Charger Tiny Whoop Blade Inductrix Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors

#ad
#ad
Crazepony #ad - Connector female JST-PH 2. 0 Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. 20 degree mount works well with the 1. 8 lense on these cameras. All stock hardware is used, press them into the mount, and 2 side Flight Controller Screws, super simple installation.

Weight: 1. 8g each, quantity: 4 pcs 2 CW and 2 CCW. Must have for HV batteries and high performance. Support 02a/06a charge current by switch button ( Suggest using 02a if you charge six at the same time and 06a if you only do 2). Usb interface input suggested range: 5V±5% on 05-2. 4a, suggested 2. 4a or above.

1S LiPo Battery USB Charger 3.7V/4.20V 6 Channel 1S LiPo Charger Tiny Whoop Blade Inductrix Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors #ad - Need to consider width of battery. All in one vtx + camera + antenna, plug and play, ready to fly. Charge 6 batteries at the same time, keep your tiny whoop staying in the air. The aio camera combo is perfect for ultra micro drone.

More information about Crazepony #ad


Similar products



6pcs GNB 260mAh HV 1S LiPo Battery 30C 3.8V LiHV for Tiny Whoop JST-PH 2.0 Powerwhoop mCPX Connector

#ad
#ad
Crazepony #ad - Just remove the front, and reassemble. Output connector: 6x micro jst 1. 25; 6x jst-ph 2. 0 Speed: insane, 19000kv / 70000 rpm. Need to consider width of battery. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. Input charge connector: male 4mm Banana Plug, it needs to connect to LiPo charger for charging battery.

Weight: 7g/per unit, size:66x11. 5x5. 9mm. This is a camera/vtx mount for the blade inductrix. Only fit for fx798t fx797T MC-01 camera. This fpv canopy weights at 23g. Tiny whoop Blade inductrix future choice of battery. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes.

6pcs GNB 260mAh HV 1S LiPo Battery 30C 3.8V LiHV for Tiny Whoop JST-PH 2.0 Powerwhoop mCPX Connector #ad - 20 degree mount works well with the 1. 8 lense on these cameras. All stock hardware is used, press them into the mount, and 2 side Flight Controller Screws, super simple installation. With 1. 25mm jst plug, perfect for Inductrix FC. Note: pls plug into power supply first, and puncture the hole, then the charger will change charging modes.

More information about Crazepony #ad


Similar products